Bushnell 119302 instruction manual About the PIR Sensor

ABOUT THE PIR SENSOR

The sensor that triggers the trail camera is Passive Infra Red, or PIR. Infrared energy is essentially heat energy. The PIR detector operates by sensing a change in the infrared level in its detection zone. This zone is a cone in the center 10 degrees of the camera’s field of view. The camera establishes an average long-term infrared level. When this level increased suddenly the PIR detector signals the camera to record a picture and/or an event. Because of this effect, the PIR detector will be more sensitive at night, when the average temperature is lower.

You can use the red LED indicator on the front of the camera to confirm the detection zone. When PIR is sensed, this “PIR detected” indicator will light. The camera’s field of view is a 45 degree cone, centered on the PIR detection zone.

12

119302 Trail Sentry manual-Engli12 12

2/14/07 10:39:53 PM