11
distance in the standard mode is 10 yards. To use the Automatic SCAN feature, simply hold down on the POWER
button for approximately 3 seconds and move the rangender from object to object while leaving the POWER button
depressed. Automatic SCAN will allow the range to be continuously updated as multiple objects are targeted.
BullsEye™ (Display Indicator - ) is advanced mode allows easy acquisition of small targets and game without
inadvertently getting distances to background targets that have stronger signal strength. When more than one object
has been acquired, distance of the closer object will be displayed and a crosshair will surround the BullsEye™ indicator
informing the user that distance to the closer object is being displayed.
Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle onto the object (i.e.
deer) that you want distance to. Next, press and hold the POWER button and move the laser slowly over the deer
until crosshairs surround the BullsEye indicator. If the laser beam recognized more
than one object (i.e. deer and background trees), distance of the closer object (i.e. deer) will be displayed and crosshairs
will surround the BullsEye indicator informing the user that distance to the closer object is being displayed (Figure
1). ere may be times when only the laser beam only sees one object in its path. In this case, the distance will be
displayed, but because more than one object was not acquired, crosshairs will not surround the BullsEye indicator.
Figure 1