Hold Mark, Select another icon press Power | Bushnell 360200

Hold MARK

Stand at the location you want	Location marked (memorized)-you are
to mark as “Home”	“0” yards from “Home”

7.Select an icon you want to use. While you are physically at the location you want to mark (i.e. your campsite), press and hold the MARK button until you see the display change as shown at right above, confirming the location is stored. Note: it does not matter which direction you face when marking a location.

1

POWER

To mark another location:

1-Select another icon (press POWER)

2-Go to the new location, then MARK the location (hold MARK)

2

MARK

8.Turn POWER off or proceed to another location you want to mark. Be sure to select a different icon before marking a new location. If you hold down MARK with a previously used location icon still selected, you will replace that one with your current location.

6

Image 6

Bushnell 360200 quick start Hold Mark, Select another icon press Power

Contents

GPS Control & Display Guide Hold Power Button GPS Satellite Reception Icon Lock Position Downup Home Hold Mark PowerSelect another icon press Power Mark To your campsite Mark icon Degrees, minutes, and seconds Correct Operating Position Incorrect Operating Position Other Operations Press Mark to activate backlight Liability Notice GPS System & Location Accuracy NoticeVehicular Use Notice FCC Note ONE Year Limited Warranty U.S.A. Send To Bushnell Outdoor Products Cody, Overland Park, Kansas