Lit. #:
Harbormaster ™
35 x 60
Refractor Telescope
Model
Thank you for purchasing the Bushnell Harbormaster Telescope! Your new telescope has been designed and crafted with the highest standards so that you may have years of enjoyment out of this wonderful window to the world. This instrument comes complete with a vintage solid brass telescope crafted and polished to perfection, a solid wood tripod with antique cherry finish, and a precision ground 60mm lens.
We would like to take this time to illustrate some of the inherent traits of brass. Brass has a tendency to have minor imperfections that should not be considered as defective. Rather, these should be considered just for what they
It is our hope that you will enjoy and appreciate this fine example of Old World craftsmanship and its authentic design for years to come.
STANDARD EQUIPMENT
•Solid Brass Telescope
•Solid Wood Tripod
•Altazimuth Yoke Mount
•Accessory Tray
•Hardware Pack:
Tripod leg:
Accessory tray:
Tripod Leg Lock Screws: 3 pc.
TELESCOPE ASSEMBLY
Remove all components from the carton and identify all components. READ THROUGH ASSEMBLY INSTRUCTION BEFORE YOU ASSEMBLE YOUR TELESCOPE.
1.Set-Up Tripod, Mount and Accessory Tray
•Locate the Altazimuth Yoke Mount (3). Note: B e f o r e assembling tripod legs to Altazimuth Yoke Mount, make sure the Accessory Tray Braces (7) face inward.
Locate the long bolts and washers from the hardware pack. Position the mount over the Tripod Leg (5) as shown (fig. 1) and align the holes in the Tripod Leg with the holes in the mount. Insert the bolts through the holes at the top of a Tripod Leg. A washer should be positioned on both outer sides of the Tripod Leg. Attach a wing nut to th e bolt, but do not tighten it all the way. Repeat on the remaining two Tripod Legs. Once you have attached all Tripod Legs to the mount, securely tighten a ll wing nuts.
•Locate the Accessory Tray (8). Using the accessory tray bolts, wingnuts and washers (
Continued on page 2