Leg and attach wingnut. Wingnuts should be positioned beneath the Accessory Tray. Do not tighten wingnuts until all Accessory Tray Braces are attached as some adjustments may be required.
•Select one Tripod Leg (5) and extend the Tripod Leg Middle Section (6). Using Tripod Leg Lock Screws (9) included in the hardware pack, insert the Tripod Leg Lock Screw into the lower brackets on the Tripod Leg . Tighten the Tripod Leg Lock Screws so that the middle section is securely in place. Repeat on remaining two legs.
2.Attach Telescope
•Locate Telescope Main Tube (2). Secure telescope to Altazimuth Yoke Mount (3) by positioning the telescope between yoke. Carefully insert the Altitude Lock Knobs
(11)through the yoke mount and into the threaded brackets on the side of telescope tube and remove lens cover from 60mm Objective Lens (1).
Your Bushnell Telescope is now ready to be used. To obtain the fullest enjoyment from your telescope, please refer to the additional information below.
HOW TO USE YOUR NEW TELESCOPE
Focusing Telescope:
1.After assembly, aim Telescope Tube (2) at a
2.While looking through eyepiece slowly adjust focusing tube (10) by sliding telescoping tube inward until object comes into focus in the eyepiece.
Never Look Directly At The Sun With Your Telescope Permanent Damage To Your Eyes May Result.
WARRANTY / REPAIR
TELESCOPE LIFETIME LIMITED WARRANTY
Your Bushnell® telescope is warranted to be free of defects in materials and workmanship for the lifetime of the original owner. The Lifetime Limited Warranty is an expression of our confidence in the materials and mechanical workmanship of our products and is your assurance of a lifetime of dependable service.
If your telescope contains electrical components the electronic components are warranted to be free of defects in materials and workmanship for one year after the date of purchase.
In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse or improper handling, installation or maintenance of the product.
Any return made under this warranty
must be accompanied by the items listed below:
1)A check in the amount of $15.00 to cover the cost of handling
2)Name and address for product return
3)An explanation of the defect
4)Product should be well packed in a sturdy outside shipping carton to prevent damage in transit and return postage prepaid to the address listed below:
IN U.S.A. Send To: | IN CANADA Send To: |
Bushnell Performance Optics | Bushnell Performance Optics |
8500 Marshall Drive | 25A East Pearce Street, Unit 1 |
Lenexa, Kansas 66214 | Richmond Hill, Ontario L4B 2M9 |
For products purchased outside the United States and Canada please contact your local dealer for applicable warranty information. This warranty gives you specific legal rights. You may have other rights which vary from country to country.
©2001 Bushnell Performance Optics
(fig. 1)
2
