Bushnell 78-7351 manual Deleting/Protecting Photos And Formatting A New Sd Card, Review

To see thumbnails of multiple pictures stored in the memory while in Review mode, push the “Display” Button. You may see up to 9 pictures at a time. You move through the thumbnails by using the Up, Down, Left and Right arrows on the 4-way switch.

Press “Display” again to see a selected (highlighted) thumbnail as a full frame photo.

To exit from the Review mode, again press the “View” button. You are then back in Capture mode.

DELETING/PROTECTING PHOTOS AND FORMATTING A NEW SD CARD:

With the camera in the Review mode (press the View button if necessary), press the “MENU” button in the middle of the 5-way switch. This opens the menu that will allow you to perform the following actions:

(use the 5-way switch and menu button as previously instructed to make choices from this menu, select or change settings, and return to the main menu)

PROTECTED and UNPROTECTED. Once protected, a photo must be unprotected using this menu item before it can be deleted.

SETUP: Provides same options as SETUP in the previous “Record” mode menu-those items can also be accessed while in Review mode to change time/date stamp, beep on/off, etc.

EXIT: Returns to the regular Review mode (stored photos are displayed).

LCD DISPLAY SYMBOLS (ICONS VISIBLE IN CAPTURE OR REVIEW MODE AS INDICATED) CAPTURE

Full

Low 1) Battery Meter: Displays battery level

Dead

022 2) Total Photos: Displays the total number of photos currently stored in internal or SD card memory.

DELETE: Erases photos from the internal memory, or from the SD card if you have inserted one before beginning to shoot photos. You may choose:

• One: deletes the currently displayed photo only-after pressing MENU to delete a photo, use the left/right arrow key to display the next photo you want to delete and repeat the process

•All: deletes all photos held in the internal memory or SD card

•Cancel: select if you decide not to delete a photo after entering this menu

FORMAT: Formats a new or previously used SD card to enable storing photo files. Select OK and press MENU after inserting a card for the first time. Be sure the card has been inserted with the notched corner on the left as indicated below the card slot. Note that formatting a card will erase any photos previously stored on the card. Note: “MMC” cards are not compatible and should not be used.

PROTECT: Protects the currently displayed photo from accidental erasure. Pressing the MENU button will toggle between

10

3M
H	3)	Resolution Setting: “3M”: 2048×1536, “H”: 1600×1200, “M”: 1280×1024, “L”: 800×600
M
L
*
**	4)	Image Quality: *** “Best,” ** “Better,” * “Standard
***
ON	5)	Capture Mode: Normal (no icon), self timer (clock icon), sequential (multiple frame icon).
	6)	SD card: Displayed when a card is inserted.

REVIEW

1)Photo number / Total Photos: Displays number of review photo / Total photos currently stored

2)Image Resolution: Indicates resolution of review photo

		022
	3M
			Full
*	H		Low
	M
**	L		Dead
***

11