STANDARD EQUIPMENT

∙Reflector Telescope Assembly

∙Altazimuth Yoke Mount

∙Variable Height - Hardwood Tripod

∙20mm and 4mm focal length - .965” diameter eyepieces.

∙3X Barlow Lens

∙5 x 24mm Finderscope w/ focus adjustment

∙Vertical Stabilizer Bar

∙Accessory Tray

∙Hardware Pack

Tripod leg: 3-2.25” bolts, 6 -0.687“ washers and 3-wingnuts

Accessory tray: 3-0.5” bolts, 6 -0.687“ washers and 3-wingnuts

Tripod Leg Lock Screws: 3 pc.

Stabilizer Bar: 1 Mounting Screw

TELESCOPE ASSEMBLY

1.Remove telescope from the carton and Identify all components. READ THROUGH ASSEMBLY INSTRUCTION BEFORE YOU ASSEMBLE YOUR TELESCOPE

2.Set-Up Tripod

∙Select one tripod leg and extend the Tripod Leg Middle Section (7). Using the Tripod Leg Lock Screws (10) included in the hardware pack, insert a Tripod Leg Lock Screw into the lower brackets on the Tripod Leg

(6). Tighten the Tripod Leg lock Screws so that the Middle Section is securely in place. Repeat for the remaining two legs.

1.Attach Telescope and Finderscope

∙Locate the pre-assembledTelescope Main Tube (14) and Altazimuth Yoke

Mount (12). Note: Before assembling tripod legs to Altazimuth Yoke Mount,

 

make sure the Accessory Tray Braces (8) face inward. Locate the long bolts

 

and washers from the hardware pack. Position the mount over the Tripod

 

Leg (6) as shown (fig.1). and align the holes in the Tripod Leg with the

 

holes in the mount. Insert the bolts through the holes at the top of a Tripod

 

Leg. A washer should be positioned on both outer sides of the Tripod Leg.

 

Attach a wing nut to the bolt, but do not tighten it all the way. Repeat on

 

the remaining two Tripod Legs. Once you have attached all Tripod Legs to

 

the mount, securely tighten all wing nuts. Remove the Stabilizer Bar

 

Mounting Screw (11) from the hardware pack and insert it into the opening

 

at the base of the Vertical Stabilizer Bar (4).

fig. 1

∙Locate the Finderscope (1) with pre-assembled mounting bracket. Remove the two nuts located near the front of the telescope (closet to the eyepiece) and place the Finderscope and bracket assembly over the exposed screws. The Finderscope Focus Adjustment (16) should point towards the Primary Mirror (13).

Replace the nuts, and securely tighten the Finderscope and bracket assembly in place.

2.Attach Accessory Tray

∙Locate the Accessory Tray (9). Using the accessory tray bolts, wingnuts and washers (3-0.5” bolts, 6 -0.687“ 3- wingnuts) connect the Accessory Tray to the Accessory Tray Braces (8). Start with one tripod leg and attach wingnuts. Wingnuts should be positioned beneath the accessory tray. Do not tighten wingnuts until all Accessory Tray Braces are attached as some adjustments may be required.

Your Bushnell Telescope is now ready to be used. To obtain the fullest enjoyment

from your telescope, please refer to the additional information below.

Page 1 Page 3
Page 2
Image 2
Bushnell 78-9003 manual Standard Equipment, Telescope Assembly, Attach Telescope and Finderscope, Attach Accessory Tray
Page 1 Page 3

78-9003 specifications

The Bushnell 78-9003 is a advanced tool designed for outdoor enthusiasts, bringing together high-quality optics and innovative technology to enhance the user experience. This model is particularly favored among bird watchers, hikers, and sports spectators for its combination of portability and performance.

One of the standout features of the Bushnell 78-9003 is its powerful magnification capabilities. With an impressive 8x magnification power, this device allows users to observe distant subjects with remarkable clarity. The 32mm objective lens diameter ensures that sufficient light enters the optics, providing bright and clear images even in low-light conditions, such as early morning or late afternoon.

The Bushnell 78-9003 also incorporates high-quality multicoated optics, which enhances light transmission and improves color fidelity. This technology reduces glare and increases brightness, making it easier to see details in challenging lighting. The high-definition glass used in the construction delivers sharp images and helps minimize distortion, making it an excellent choice for those who value image clarity.

Durability is another defining characteristic of the Bushnell 78-9003. Designed with a rugged housing, this model is both shockproof and waterproof, making it suitable for various outdoor environments. The rubber armor coating provides a secure grip and protects the unit from impact, ensuring longevity. Furthermore, it is nitrogen-purged to prevent fogging, which is crucial for maintaining visibility in changing weather conditions.

The compact and lightweight design of the 78-9003 adds to its portability, allowing users to carry it easily on hikes or during travel. This model also features a comfortable eyecup that can be adjusted for individuals who wear glasses, ensuring that everyone can enjoy the viewing experience without discomfort.

In addition to its optical performance, the Bushnell 78-9003 boasts user-friendly features, including a smooth focusing mechanism that allows quick adjustments to get the perfect view. Its close focus capability lets you observe subjects at a short distance, making it not only suitable for distant viewing but also for examining the intricate details of nature.

In summary, the Bushnell 78-9003 combines high-quality optics, durable construction, and user-friendly features, making it an ideal choice for outdoor enthusiasts seeking reliable performance in a compact package. Whether for bird watching, sports events, or leisurely hikes, this device is equipped to provide an exceptional viewing experience.
Top Page Image Contents