Kit Contents
Cabela’s® Gun Dog® Remote Trainer Kit
Transmitter
FIRST THINGS FIRST
You will need to charge your Gun Dog® Transmitter and Collar Receiver before you can use them. While your Gun Dog® Transmitter and Collar Receiver are charging, read this manual to become familiar with the devices.
Transmitter
OR
Step 1 Charging the Batteries
1
AC Adapter
3
From AC Adapter to “Y” Cable
2
“Y” Cable
Quick Start Guide
to Charge Cradle
4Receiver 
Light
Quick Start Guide
Collar Receiver
Gun Dog® Hardware
includes Antenna,Test Light, Lanyard, Belt Clip, Long Contacts, and Contact Wrench.
Gun Dog® Charging System
AC Adapter | Charge Cradle |
“Y” Cable
1.Plug the AC Adapter into a 120VAC electric outlet.
2.Connect the AC Adapter to the “Y” cable.
3.Connect the “Y” cable to the Charge Cradle.
4.Put the Receiver on the Charge Cradle as shown in figure 4 (both logos are on the same side).
CHARGE CRADLE INDICATOR LIGHTOPERATIONAL MODE | LIGHT COLOR | LIGHT FUNCTION |
No Collar Receiver on | Green | Light is solid in color |
the Charge Cradle but |
|
|
charger is connected |
|
|
|
|
|
Unit is charging | Red | Light is solid in color |
|
| while charging |
|
|
|
Unit is fully charged | Green | Light flashes once per |
(Collar Receiver on |
| second once the battery |
Charge Cradle) |
| is completely charged |
|
|
|
5.On the Transmitter, move the Charge Port Cover away from the Charge Port. Connect the remaining end of the “Y” cable to the Transmitter’s Charge Port. Charge the transmitter for at least 2 hours.
Back view of Transmitter
5
Charge Port Cover
2 | Cabela’s® Gun Dog® — Owner’s Manual | Cabela’s® Gun Dog® — Owner’s Manual | 3 |
