Cable Electronics HSW88C instruction manual Display Side, Hdmi input source #1, Enter

Mechanical		HSW88C	HSMR
Enclosure		Metal case
	Model	440 x 290 x 44mm [1’5” x 11.4” x	85 x 90 x 25mm [3.3” x 3.5” x 1”]
Dimensions		1.7”]
	Package	528 x 398 x 130mm [1’9” x 1’4” x	90 x 85 x 25mm [3.5” x 3.3” x 1”]
(L x W x H)		5.1”]
	Carton	280 x 550 x 420mm [11” x 1’10” x 1’5”]
Weight	Model	3250g [7.2 lbs]	180g [6.3oz]
	Package	7.1 kg [15.6 lbs]
Mounting		1U rack-mount with ears	Wall-mount with screws
Power supply		AC Power 100-240V	Not necessarily required1
Power consumption		60 Watts [max]	1.5 Watt [max] (provided by
			MA-5188)
Operation		0~40°C [32~104°F]
temperature
Storage temperature		-20~60°C [-4~140°F]
Relative humidity		20~90% RH [no condensation]
		1x HSW88C (matrix switch)	8x HSMR (HDMI receiver)
		1x IR blaster2	8x IR receiver
Package Contents		2x 1U rack mounting-ear	16x Wall-mounting screws
		1x IR remote controller2	1x UL AC power cord
		1x User Manual

1. The HSMR has been tested extensively and found that

it doesn’t require external power supply. If in rare situation you find it cannot work with the HSW88C, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.

2.Additional IR remote control and IR blaster cable can be purchased as optional accessories to control the HDMI sources located separately.

3.USB or RS-232 control must be connected either one at a time. Connecting both types of cables may cause command confusion.

DISPLAY SIDE

Method A: Push button for switching input channels

Press the INPUT SELECT push button to switch the input source on the respective output port connected to the matrix receiver in sequential order. The selected input source will be displayed on the LED of INPUT CHANNEL.

Method B1: IR remote control for switching input channels

Please press F1 to F6, Enter () , and Exit ( ) button to enter IR control mode and decide which input channel to be selected by pressing F1 to F6, Enter ( ) , and Exit ( ) button, and wait a few seconds for the input channel LED display to show the number of selected input source channel. Or you can use up ( ) and down () button to enter IR control mode and select the input channel in ascending and descending order respectively.

Note:

F1			HDMI input source #1
F2			HDMI input source #2
F3			HDMI input source #3
F4			HDMI input source #4
F5			HDMI input source #5
F6			HDMI input source #6
Enter (		)	HDMI input source #7
Exit (	)		HDMI input source #8
Up (	)		Switch source in ascending order
Down (		)	Switch source in descending
			order

>If HSMR receives the IR command, the LED will flash. If not, try it again.

Method B2: IR remote control for controlling the HDMI sources Users can use the corresponding IR remote to control the HDMI source