Application Notes
1.IMPORTANT: Please select “Safely Remove Hardware” or “Eject” for USB devices connected to any of the 3 downstream USB ports on the TruLink KVM Switch before switching between the hosts. Switching hosts is equivalent of removing the USB devices, which may damage your USB devices or data if not removed properly by the OS.
2.The TruLink KVM normally derives its own power from host computer. When the
3.Unknown Device: If the installation process has been completed and some of the devices
still don't work, please go to: Device Manager, check to see if any “Unknown device” icons appear on the screen. You may need to “Remove” and “Refresh”, then start the installation process again. If after trying the above mentioned process and your device still does not work, please contact your Cables To Go technical support. **Note: If you are connected to a
17
