Connecting the Device
1.Use an HD15 male to male cable to connect your monitor or projector to the HD15 female port with the picture of a monitor under it.
2.Use HD15 male to female cables to connect your computers to the HD15 male ports labeled
3.Connect the power adapter to the port labeled DC 5V and connect the adapter to a power outlet.
4.Use the push buttons on the front of the device or the IR remote control to switch the video signal sent to your monitor or projector.
5.The LED above the push button on the front of the device will light green to indicate which computer is selected.
6.Turn the on/off the device and your monitor by switching on/off the red toggle switch on the front of the device.
1501 Webster Street
Dayton, Ohio 45404
4
