DEVICE INSTALLATION
Note: Before installation, you will need to have a TruLink VGA w/Audio Extender Base Unit (1 or 4
port Model: #39984 or #39985 respectively), and a TruLink VGA w/Audio Extender Remote Unit (#39986). (each sold separately)
Step 1
Turn off your PC
Step 2
Connect the Extender Base Unit (39984:1 port) or (39985:4 port) HD15 female Input connector with a HD15 male to male cable from your PC.
Step 3
Connect the Audio In connector at the Extender Base Unit with a 3.5mm stereo cable from your PC stereo or headphone output (a cable is provided for you).
Step 4
Connect the Mic In connector at the Extender Base Unit with a desktop or portable microphone with stereo audio capability.
Step 5 (optional)
If you are using a local monitor, connect the Extender Base Unit HD15 female Output connector with a HD15 cable from your monitor.
Step 6
Connect the Extender Base Unit and Extender Remote Unit with a Cat5 cable.
7
