Cables to Go 39986 manual Step, Connect the Extender Base and Remote Unit power adapters

Models: 39986

1 16

Page 9

DEVICE INSTALLATION

Step 7

Connect the Extender Remote Unit HD15 female connector with a HD15 cable to your monitor.

Step 8

Connect the Extender Remote Unit Audio Output connector with an audio cable to the monitor or audio receiver.

Step 9

Step 10

Turn on your PC, monitors, and other equipment, and your installation is complete!

Note: Cat6 cables can be used but not recommended due to the skew of the signal pairs.

Image 9

Contents

USER GUIDE VGA W/AUDIO OVER CAT5 EXTENDERModel 39986remote unit TABLE OF CONTENTS INTRODUCTION ™ Supports the following resolutions using Cat5E* cabling FEATURES100M 1280x1024SYSTEM REQUIREMENTS ™ Base Unit- 39984 or #39985 sold separately ™ Cat5E UTP Cable™ HD15 and 3.5mm audio connection on computer PACKAGE CONTENTS ™ DC 12V 600mA Power Adapter ™ User Manual™ TruLink VGA w/Audio over Cat5 Extender Remote Unit Gain-Adjusts DEVICE OVERVIEWPower Adapter Input EQ-Adjusts the picture signal strength HD15 OutputStep DEVICE INSTALLATIONStep 5 optional StepStep Connect the Extender Base and Remote Unit power adaptersStep StepDEVICE INSTALLATION Application Diagram39984 Cat5 cable Microphone 39986DEVICE INSTALLATION Application Diagram39985 Cat5 cable Microphone 39986Problem TROUBLESHOOTINGPossible Solution No picture or signalTECHNICAL SPECIFICATIONS Cables To Go CABLES TO GO ONE YEAR WARRANTYIMPORTANT SAFETY INFORMATION