E.OPERATION
1.Turn on the transmitter. The LED will light up in Green.
2.Turn on the audio source (TV or audio component like an iPod) to which the transmitter is connected. The LED will change from Green to Blue.
3.Select channel 1, 2 or 3 of the transmitter for best performance in your location.
4.Turn on the Power button on the speaker. Press the Autoscan button. Adjust the volume by pressing “+” and
Caution: Screw the battery door clockwise to tightly close it and to make sure there is no gap before placing the speaker into the water.
5. You can now place the floating speaker in the pool, bathtub, hot tub etc.
CAUTION: Your speaker will operate best and loudest with no water resting on top of the speaker. Periodically draining the speaker by inverting it will ensure that not too much water remains standing on top of the speaker driver. Turn the speaker over and lightly shake it to let the water drain out quickly for best audio performance and when storing the speaker between uses.
