F.TROUBLE SHOOTING
NO SOUND
-Too much water retention inside the speaker grill. Turn the speaker over and gently shake it to let the water drain out.
-Ensure you have fresh alkaline batteries for both transmitter and receiver if the speaker’s and/or transmitter’s battery charge is too low, sound distortion will be heard. Replace with new batteries.
-Ensure the audio component is ON and its volume is set to at least 50%.
-The connected audio equipment is not playing. Start playing the equipment.
-The volume of speaker is too low, adjust the volume to an appropriate level. Adjust your audio source component volume to maximum.
DISTORTED
-Too much water retention inside the speaker grill. Turn the speaker over and gently shake it to let the water drain out.
-Press the “Scan” button on the speaker to best match the frequency of the transmitter.
-Change the position of the channel selector on the transmitter. You must then press the “Scan” button on the speakers.
-Battery capacity is too low. Replace with the new batteries.
-Ensure the volume level of speakers is adjusted properly.
-The speaker is too far from transmitter, move closer.
-The input level of the audio signal is too low. Turn up the volume of the audio source equipment.
