2-5
Installation
See the
Cautions
at the end of this table.
Table 2-1. Functions of DIP Switch
Switch Function Description
8 Clear
Password
1
When toggled, this switch clears user-entered
passwords stored in NVRAM, and restores the
default passwords. Once reset you can use the
defaults or enter new passwords.
7 Clear
NVRAM
2
The module uses NVRAM to store user-
entered parameters such as IP addresses,
device name, etc. To reset these parameters to
the factory defaults, toggle this switch. Once
reset, you can use the defaults or enter new
parameters which are stored in NVRAM when
the module is powered down, and remain
there until the switch is toggled again.
6 Force BootP
Download
Toggling this switch after pulling the board out
of the SmartSwitch 9000, clears download
information from NVRAM and forces image
Þles to be downloaded from the station
conÞgured to act as that modulesÕ BOOTP
server.
5 Reserved For Factory Use Only (Factory Default is OFF)
4 Reserved For Factory Use Only (Factory Default is OFF)
3 Reserved For Factory Use Only (Factory Default is OFF)
2 Reserved For Factory Use Only (Factory Default is OFF)
1 Reserved For Factory Use Only (Factory Default is OFF)
1 Do not toggle Switch 8 unless you intend to reset the user-conÞgured passwords
to their factory default settings.
2 Do not toggle Switch 7 unless you intend to reset the user parameters to the
factory default settings.
!CAUTION