Cabletron Systems ELS100-8TXUF2 manual Installation, Inspecting Your Shipment, Site Requirements

2. INSTALLATION

Inspecting Your Shipment

When you receive the shipment of your switch, check the package contents and make sure you have the following items:

•ELS100-8TXUF2 Fast Ethernet switch

•Mounting velcro

•Rubber feet

•Power adapter

•This document

Site Requirements

Before you install the switch, make sure the site meets the following requirements:

•Mounting

Provide a flat table, wall or shelf surface.

•Power source

Provide a power source within six feet (1.8 m) of the installation loca- tion. This source must provide 100 VAC to 240 VAC, and 50 Hz to 60 Hz power, with a 100 VA minimum. Power specifications for the switch are shown in Appendix A, “Technical Specifications.”

•Environmental

Install the ELS100-8TXUF2 switch in a dry area, with adequate air circulation. Avoid placing the switch in direct sunlight or near other heat sources, such as hot-air vents. For temperature and humidity specifications, see Appendix A, “Technical Specifications.”

•Ventilation

Do not restrict airflow by covering or obstructing air inlets on the side of the switch.

9033029 Installation 7