Cabletron Systems MPS14 manual Cleaning and Replacing the fan filters, Replacing the mains fuse

Cleaning and Replacing the fan filters.

At regular intervals, it is recommended that the two foam fan filters are cleaned or replaced to ensure efficient operation of the power unit. Failure to do so may reduce the efficiency or even damage the power unit.

Use a vacuum cleaner to remove dust from the air intakes on the rear of the power unit

If the filters need replacing contact your nearest service agent or Allen & Heath dealer.

Fan filter part No: AK4070

Replacing the mains fuse

The AC mains fuse is located on the rear of the MPS14 unit next to the AC mains connector. In the event of a mains surge or under-rated fuse value, the mains input fuse will rupture. Switch off the power supply and remove the mains lead plug from the “MAINS INPUT” socket on the rear of the unit.

Check the fuse and replace if necessary.

TO AVOID THE RISK OF FIRE REPLACE FUSE WITH THE CORRECT TYPE

ONLY, AS INDICATED ON THE UNIT

AC~ mains input voltage	Fuse type
100V – 230V ± 10%	T 5A 250V 20mm

In the event of repeated failure of the mains fuse, consult the local dealer from where the unit was purchased.

8 MPS14 User Guide