Cabletron Systems SWPIM-BRI manual Chapter Installation, Unpacking The Swpim-Bri

CHAPTER 1

INSTALLATION

Only qualified personnel should install the SWPIM-BRI.

This chapter covers the following items:

•Unpacking the SWPIM-BRI (Section 1.1)

•Installing the SWPIM-BRI into the host platform (Section 1.2)

•A description of the LANVIEW LED indications (Section 1.3)

•Connecting the SWPIM-BRI to the network (Section 1.4)

•What to do once the SWPIM-BRI is installed (Section 1.5)

1.1UNPACKING THE SWPIM-BRI

Use static electricity precautions when handling the SWPIM-BRI.

Failure to observe static safety precautions could cause

!damage to the SWPIM-BRI. Follow static safety handling rules

CAUTION	and wear the antistatic wrist strap shipped with the
	SWPIM-BRI.

1.Open the packing box and remove the SWPIM-BRI.

Do not cut the non-conductive bag to remove the device.

!Damage could result from sharp objects contacting the device

CAUTION or components.

2.Attach the antistatic strap (refer to the instructions in the wrist strap package) before removing the SWPIM-BRI from the antistatic packaging.

3.Verify that the SWPIM-BRI is undamaged. Refer to Getting Help if there is any damage to the device. Do not attempt to install the SWPIM-BRI if it is damaged.

SWPIM-BRI Installation Guide 1-1