Cabletron Systems THN-MIM BNC Interface Ports, Indicators POK, Rcv, Environmental Requirements

INTRODUCTION

NOTE: Cabletron Systems reserves the right to change these specifications at any time without notice.

BNC INTERFACE (Ports 1-12)

Type:	BNC receptacle, with gold center contact,
	for use with BNC type plugs and RG-58
	thin-net cable.
Internal Transceiver:	Cabletron Systems TMS-3 Transceiver.
	For further information, refer to the
	TMS-3 Transceiver User's Manual.
Terminations:	Each segment is internally connected to a
	50 ohm terminator in the port.
Grounding:	Each segment connector shield is
	internally connected to earth ground by the
	THN-MIM. This eliminates the need for
	grounding the segments connected to the
	BNC ports.
INDICATORS
POK	Indicates that the port is connected to the
	network.
	When the module is first installed into the
	MMAC, the LED will not be lit until the
	first data packet passes through the port.
RCV	Indicates that the module is receiving a
	data packet from that segment.
ENVIRONMENTAL REQUIREMENTS
Operating temperature:	+5 to +40 C
Non-operating temperature: -30 to +80 C
Operating humidity:	5 to 95% (non-condensing)

Page 1-3