3
Set-up
If your electric pizza oven is already installed in a Cal Flame barbecue island, it is nearly ready to use.
Open the oven door and remove all materials and packaging.
Remove the hearth bricks from their packaging and place them in the oven lengthwise from front to back.
Place the stainless steel rack on the hearth bricks.
When everything has been set in place, close the door turn the tem- perature control on the right. If the light does not turn on, check the plug inside the barbecue island to make sure the oven is plugged into a dedicated 110V grounded outlet. We strongly recommend having a contractor install a dedicated electrical service for your barbecue is- land. Do not use an extension cord.
Cut-Out Dimensions
If you purchased your electric pizza oven with the intention of installing it in a barbecue island, use the diagram below to help you with place- ment and dimensions.
You need to have a dedi- |
|
| ||||
cated | 110V | grounded |
|
| ||
electrical | outlet | to plug |
|
| ||
the pizza oven into. We |
|
| ||||
strongly recommend hav- |
|
| ||||
ing a contractor install a |
| 10” | ||||
dedicated | electrical ser- |
| ||||
vice | for | your | barbecue | 21 1/2” |
| |
island. Do not use an ex- | 28 1/2” | |||||
| ||||||
tension cord.
