Safety Instructions
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
Placement and Location
The Cal Flame Power Burner is designed for outdoor use only.
•Never locate this appliance in an enclosed room, under a sealed overhead structure, or in any type of enclosed area such as a ga- rage, shed, or breezeway. Keep clear of trees and shrubs.
•Do not place the Power Burner under or near windows or vents that can be opened into your home.
•The Power Burner is not intended for installation in or on recre- ational vehicles or boats.
•Maintain sufficient distance as to not overheat any overhead com- bustible material such as a patio cover.
•The area surrounding your new Power Burner should be kept clean and free from flammable liquids and other combustible materials such as mops, rags or brooms, as well as solvents, cleaning fluids, and gasoline.
•Do not store the liquid propane (LP) cylinder in the vicinity of this or any other appliance when it is not being used.
Set-Up
•Before installing a
•We recommend that a licensed contractor install your Cal Flame Power Burner. Installation must conform to local codes, or in the absence of local codes, with either the National Fuel Gas Code,
ANSI Z223.1 / NFPA54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2), as applicable.
•To prevent fire and smoke damage, remove all packaging material before operating your Power Burner.
•Before you start cooking, clean the Power Burner thoroughly with hot, soapy water. This is necessary to remove residual solvents, oil and grease used in the manufacturing process.
Power Burner
1 SafetyInstructions
LTR50001100, Rev. A | www.calflamebbq.com |
