Cal Flame LTR20081044 manual Installation / Assembly, Cabinet Cut-out Dimensions

Installation / Assembly

Installation / Assembly

Most cities and counties require permits for exterior con- struction and electrical circuits. In addition, some com- munities have codes requiring residential barriers such as fencing and/or self-closing gates on property to pre- vent unsupervised access to the property by children under the age of five. Your dealer can provide informa- tion on which permits may be required and how to obtain them prior to the delivery of your equipment.

We recommend the installation, adjustment and service of your new grill be performed by qualified installers and service technicians to ensure proper operation and pre- vent accidents.

When planning your Cal Flame™ grill location, access to gas lines and power source should be considered. The location with the shortest gas line run is recommended. A grounded, dedicated, 220V 15A RCD power source is required for use of your appliances.

When determining a suitable location, consider factors such as exposure to wind, proximity to traffic paths, and windows that open into the home.

Locate barbecue grills only in well-ventilated areas and only on solid, flat foundations (e.g. deck or cement slab).

IMPORTANT: Cal Flame™ grills are manufactured to operate on liquid propane (LP) gas and cannot be con- verted. To verify the grill’s operating fuel, check the serial number label in the back of the chassis as you are looking at the grill from the front. LP will be marked on the operating tab, indicating the proper operating fuel. Attempting to convert Cal Flame™ grills from one fuel to another may result in serious injury and will void the warranty coverage.

Always check the rating plate to make sure the gas supply you are hooking up to is the gas type the grill is manu- factured for.

Cabinet Cut-out Dimensions

Your Cal Flame™ grill is designed for easy installation into a non-combustible enclosure. The supporting deck or counter must be flat and level. When determining the final location of your grill, adequate cross ventilation must be present to prevent gas from being trapped in the event of a leak.

The drawings at right shows the cabinet cut-out dimensions for gas grills and the side burner.

Model Number	Description	Width	Depth	Height
BBQ08872U	2 Burner Grill	59.1 cm	59.1 cm	23.5 cm
BBQ08873U	3 Burner Grill	59.1 cm	59.1 cm	23.5 cm
BBQ08874CU	4 Burner Grill	78.1 cm	56.5 cm	23.5 cm
BBQ08875CU	5 Burner Grill	97.2 cm	56.5 cm	23.5 cm
BBQ08898U	Deluxe Single	30.8 cm	55.2 cm	18.4 cm
	Side Burner
BBQ08899U	Deluxe Double	31.5 cm	55.3 cm	18.4 cm
	Side Burner

Cut-out for barbecues, side burners and slide-in accessories

WIDTH DEPTH

HEIGHT

Cal Flame 2008 Owner’s Manual Page 3

LTR20081044, Rev. A