8 FireplaceWrap
Installing SpaYour
Natural Gas Requirements
Always check the rating plate to make sure the gas supply you are hooking up to is the gas type the fireplace is manufactured for.
IMPORTANT WARNING: All Cal Flame fireplaces are manufactured with the highest regard to safety. For this reason, Cal Flame s and fireplaces are either manufactured to operate on liquid propane (LP) or natural gas (NG) and cannot be converted. To verify the operating fuel, remove the bottom drip pan and check serial number label on the left. Either LP or NG will be marked on the operating tab, indicating the proper operating fuel.
Attempting to convert a Cal Flame fireplace from one fuel to another may result in serious injury and void the warranty coverage.
IMPORTANT: Never connect the fireplace to an unregulated gas supply.
The installation of this appliance must conform with local codes or, in the absence of local codes, to the national fuel gas code, ANSI
Ensure that the service supplying the fireplace is fitted with a conveniently positioned shut off valve with easy access.
Your Cal Flame fireplace for use with natural gas comes equipped with its own regulator which MUST NOT be removed. If this regulator needs to be replaced, use only the type specified by Cal Flame for this appliance.
•Remove the rear panel to gain access to the regulator and gas connection point.
•Connect a suitable flex connector to the regulator.
What To Do If You Smell Gas
•Do not try to light the appliance.
•Do not touch any electric switch. Do not use any phone in the immediate area.
•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
•If you cannot reach your gas supplier, call the fire department.
•Use only your hand to turn the gas control knob. Never use tools. If the valve will not turn by hand, don’t try to repair it
www.calspas.com | 2009 Spa Wraps |
LTR20091032, Rev. A |
