Manuals / Cal Flame / Lawn and Garden / Hot Tub

Cal Flame Spa Wrap manual Testing for Leaks Lighting Your Gas Fireplace, To Turn Off the Appliance

Models: Spa Wrap

1 16
Download 16 pages 59.41 Kb
Page 11
Image 11

Testing for Leaks

Lighting Your Gas Fireplace

9

Perform a leak test at least once each year whether the gas supply cylinder has been disconnected or not. In addition, anytime the gas cylinder is connected to the regulator or any part of the gas system is disconnected or replaced, conduct a leak test.

As a safety precaution, remember to always leak test your fireplace outdoors in a well-ventilated area. Never smoke or permit sources of ignition in the area while doing a leak test. Do not use a flame, such as a lighted match to test for leaks. Use only a leak testing solution as specified below.

1.Prepare a leak testing solution of sudsy water by mixing in a spray bottle half-liquid soap and half water.

2.Check and make sure all the control knobs are in the OFF position.

3.Turn cylinder valve knob counter clockwise one turn to open.

4.Apply leak-testing solution by spraying on joints of the gas delivery system.

5.Blowing bubbles in the soap solution indicates that a leak is present.

6.Stop a leak by tightening the loose joint or by replacing the faulty part with a replacement part recommended by the manufacturer. Do not attempt to repair the cylinder valve if it should become damaged. The cylinder must be replaced.

7.If you are unable to stop a leak, shut off the gas supply at the cylinder valve. Remove the cylinder from the fireplace. Call an authorized gas appliance service technician or LP gas dealer. Do not use the appliance until the leak is corrected.

8.Push in and turn any control knob to release pressure in the hose and manifold.

9.Turn off the control knob.

Read the safety information above before attempting to light your fireplace.

This appliance must be lit by hand. When lighting, follow these instructions exactly. Before lighting, smell around the appliance area for gas. Be sure to smell next to the base of the appliance, because some gas is heavier than air and will settle on the ground.

1.Locate the manual gas control valve, located on the outside of the , two inches from the base of the . (Look for a bright red knob.)

2.Place a burning match on top of the burner in the middle where ports are present. DO NOT

HOLD THE MATCH IN YOUR HAND. For natural gas appliances, turn on the ON/OFF valve slowly at the appliance. For LP appliances, turn the valve on the LP tank counterclockwise all the way and then turn “ON” the ON/OFF valve slowly at the appliance.

3.If the burner does not light before the match goes out, immediately turn the gas valve to “OFF”.

4.Wait at least five minutes to clear out any gas.

Then smell for gas, including the base of the appliance. If you smell gas, STOP! Follow Safety Information above. If you don’t smell gas, repeat Step 2 above.

To Turn Off the Appliance

1.Turn the ON/OFF valve to the “OFF” position at the appliance for the natural gas appliance.

2.For an LP appliance, turn the ON/OFF valve to the “OFF” position at the appliance and then turn the valve on the LP tank clockwise to the “OFF” position.

•Do not use this appliance if any part has been underwater. Immediately call a qualified service technician to inspect the appliance, and to replace any part which has been under water.

InstallingYour Spa Wrap Fireplace

2009 Spa Wraps

www.calspas.com

LTR20091032, Rev. A

Page 10 Page 12
Page 11
Image 11
Cal Flame Spa Wrap manual Testing for Leaks Lighting Your Gas Fireplace, To Turn Off the Appliance
Page 10 Page 12

Spa Wrap specifications

Cal Flame Spa Wrap is a revolutionary product designed for spa enthusiasts seeking to enhance their outdoor relaxation experience. This innovative spa cover offers more than just protection; it brings together advanced technology and thoughtful design to maximize the usability and longevity of your spa.

One of the standout features of Cal Flame Spa Wrap is its durable construction. The wrap is made from high-quality, weather-resistant materials that protect against harsh environmental elements such as UV rays, rain, and snow. This durability ensures that your spa remains in pristine condition, maintaining its aesthetic appeal and functionality over the years.

The insulation technology used in the Cal Flame Spa Wrap is another impressive characteristic. With its high R-value, the wrap effectively retains heat, reducing energy costs and allowing for a more enjoyable experience during cooler weather. Homeowners can enjoy a warm soak without worrying about skyrocketing energy bills, making it an economical choice for spa owners.

Ease of use is a hallmark of the Cal Flame Spa Wrap. Designed for effortless application, the wrap can be secured quickly and easily, ensuring a snug fit that won’t come loose in windy conditions. This user-friendly design allows spa owners to protect their investment without additional hassle.

Moreover, the Cal Flame Spa Wrap is also designed with aesthetics in mind. Available in a variety of colors and styles, it can complement any outdoor decor, adding a touch of elegance to your spa area. This allows homeowners to maintain their chosen theme while providing essential protection to their spa.

Another noteworthy attribute is the wrap's resistance to mold and mildew. With spa environments often being humid, this feature significantly enhances the hygienic aspects of spa maintenance. The Cal Flame Spa Wrap ensures that your spa remains clean and safe for relaxation, ultimately prolonging the life of the cover and the spa itself.

In conclusion, the Cal Flame Spa Wrap is an exceptional investment for anyone looking to protect and enhance their outdoor spa experience. With its durable construction, advanced insulation technology, user-friendly design, aesthetic appeal, and resistance to mold, it ensures that your spa is always ready for you to unwind and enjoy. Investing in a Cal Flame Spa Wrap means choosing quality, innovation, and comfort, allowing you to relax fully in your personal oasis.