Operating Your Spa

Electronic Control Operation

Initial Start up

When first powered up, your spa will perform a self-diagnostic check and go into priming mode. When the control panel displays PR, IMMEDIATELY do the following:

1.Press the JETS button to turn on the pump and let it run for 10 seconds. The pump should be running in low speed.

2.Press the JETS buttons again and let the pump run in high speed for 10 seconds.

3.Press the JETS button again to turn off the pump. The pump should be left in the off position for 10 to 15 seconds.

4.Repeat steps 1 through 3 until water is flowing through all the jets and all air is removed from the plumbing.

When the spa has finished priming, the heater will be activated and the water temperature will be maintained in standard mode. The spa will heat to 100°F (37.5°C) at start up until the set temperature is changed as described below.

Temperature Adjustment

(Range 80°F to 104°F, 26°C to 40°C)

The electronic control panel displays the actual wa- ter temperature in degrees Fahrenheit. The displayed temperature will only be current after the pump has been running for at least two minutes.

To display the temperature that the spa is set to:

•Press either the Up or Down button. The tem- perature setting will flash.

•While the display is flashing, each time you press the Up or Down button, the set temperature will change up or down one degree.

Standard, Economy and Sleep Heating Modes

Your new spa is equipped with a heating feature that gives you complete control of the heating system. When the spa is powered up, it will automatically start in standard heating mode.

•St will light briefly on the main display. In this mode, the heating system will automatically main- tain the set spa temperature. In the economy-

2011 Genesis Portable Spa

heating mode, the heating system will only acti- vate during filtration times.

•Ec will display solid if temperature is not current and will alternate with spa temperature if mea- sured temperature is current.

•Economy mode will heat the water to the set tem- perature while Sleep mode, indicated by a SL on the main display, will also only activate the heater during the filtering cycles but will only heat the water to within 20°F (10°C) of the set tempera- ture. Like Economy mode, SL will display solid when temperature is not current and will alternate with actual temperature when it is current.

Switching Modes

•Press either the Up or Down button followed by the Light button.

•Press the same sequence to switch to the next mode.

Jets

Press the Jets button:

•Once to activate low speed pump.

•Twice to activate high speed.

•Three times to turn pump off.

Light

Press the Light button to turn on the light. Press it once again to turn the light off. All optional lighting such as the control panel light and cabinet perimeter lighting is controlled by the Light button and will turn on and off with the spa light.

9 OperatingYour

Spa

LTR20111058, Rev. B

www.calspas.com

Page 10 Page 12
Page 11
Image 11
Cal Spas LTR20111058 manual Operating Your Spa, Electronic Control Operation
Page 10 Page 12

LTR20111058 specifications

Cal Spas LTR20111058 is a state-of-the-art hot tub designed to offer a perfect blend of luxury and relaxation. It showcases a variety of features and technologies that cater to both functionality and comfort, making it an ideal choice for those seeking to enhance their outdoor living space.

One of the standout characteristics of the LTR20111058 is its spacious interior, accommodating up to six people. This generous seating capacity makes it perfect for family gatherings or social get-togethers with friends. The arrangement of the seats is designed to provide maximum comfort and promote soothing conversations, featuring ergonomic contours that allow users to unwind in blissful relaxation.

The LTR20111058 is equipped with multiple hydrotherapy jets, which can be strategically adjusted to target specific muscle groups. These jets provide a therapeutic massage experience that can alleviate stress and tension, making it an all-around wellness solution. The variable jet pressure settings enable users to customize their soaking experience, ensuring that everyone finds the perfect level of relaxation.

In addition to its physical features, the hot tub incorporates advanced technology, including a user-friendly control panel that allows for easy adjustments to temperature, lighting, and jet functions. The digital controls provide a level of convenience, ensuring users can effortlessly create their desired atmosphere. Furthermore, the energy-efficient heating system is designed to maintain optimal water temperatures while minimizing operational costs, making the LTR20111058 an environmentally friendly option.

Durability is another key aspect of the Cal Spas LTR20111058. Constructed with high-quality materials, the cabinet and shell are built to withstand varying weather conditions while maintaining their aesthetic appeal. The hot tub is insulated effectively, allowing it to retain heat, thereby enhancing energy efficiency and ensuring a consistently enjoyable experience.

Safety features are also paramount, with slip-resistant surfaces and secure handrails incorporated into the design. Additionally, the LTR20111058 is built with advanced water purification systems, ensuring that the water remains clean and safe for users at all times.

Overall, the Cal Spas LTR20111058 combines luxury, comfort, and innovative technology, making it a compelling choice for anyone looking to add a touch of serenity to their home. Its thoughtful design and advanced features promise not only relaxation but also a revitalizing escape from the everyday hustle and bustle.
Top Page Image Contents