Apple manual If you are installing a 68-pin Drive WS 9650 Only, Termination

	Upgrades				Bottom Drives - 8
					If you are installing a 68-pin
					drive (WS 9650 Only):
		The internal hard disk drive (SCSI ID 0)			5 Connect the Ultra Wide
		is connected to the Ultra Wide SCSI-3 bus.			SCSI cable to the drive.
				Floppy Disk Drive	Note: The unit comes
				CD-ROM Drive	with the top rear drive
				Tape backup Drive	set to SCSI ID 0. Be sure
				(optional)	to set the SCSI ID on the
					lower hard drive to a
				You can install a SCSI
				bay and connect it to the	number that is not
				device in this expansion
				Ultra Wide SCSI-3 bus.	currently being used by
					the system. Refer to the
					Basics chapter for a full
SCSI			One 5.25" Hard Disk Drive or two 3.5"Hard Disk Drives		explanation of SCSI IDs
			connected to the Ultra Wide SCSI-3 bus. (Some		and termination.
PCI			can be installed on the floor of the server and

Card

Workgroup Server models come with a second Hard

Disk Drive [SCSI ID 1] installed here.)