Apple WS 9650 manual Scsi

Take Apart Front Hard Drive - 45

The internal hard disk drive (SCSI ID 0)

is connected to the Ultra Wide SCSI-3 bus.

	Floppy Disk Drive
	CD-ROM Drive
	Tape backup Drive
	(optional)
	You can install a SCSI
	device in this expansion
	bay and connect it to the
	Ultra Wide SCSI-3 bus.
SCSI	One 5.25" Hard Disk Drive or two 3.5"Hard Disk Drives
	can be installed on the floor of the server and
PCI
	connected to the Ultra Wide SCSI-3 bus. (Some
Card
	Workgroup Server models come with a second Hard
	Disk Drive [SCSI ID 1] installed here.)

Replacement Note for

WS 9650 Only: Depending on what type of drive you install (50-pin or 68- pin) you will need to connect either the 50-pin SCSI cable or the Ultra Wide SCSI cable to the drive. The graphic at left shows the routing of the two SCSI cables in the WS 9650.