![](/images/new-backgrounds/1272400/272400131x1.webp)
TroubleshootingSymptom Charts/Power Supply - 3
Symptom Charts
Power Supply
System doesn’t power | 1 | WS 9650 Only: Verify Ultra Wide SCSI cable is not damaged | |
up |
| and that Velcro straps are secure and holding cable away | |
|
| from fan on side access panel. If necessary, replace Velcro | |
| 2 | straps and/or Ultra Wide SCSI cable if damage is visible. | |
| Reseat processor card and ROM SIMM (if present). | for | |
| 3 | Reset Cuda chip. (Refer to The Cuda Chip in Basics | |
| 4 | instructions.) |
|
| Reset logic board. (Refer to Resetting the Logic Board in | ||
| 5 | Basics for instructions.) |
|
| Replace power supply. |
| |
| 6 | Replace processor card. |
|
| 7 | Replace logic board. |
|