Take Apart | Speaker Bezel - 99 | |
|
|
|
The internal hard disk drive (SCSI ID 0)
is connected to the Ultra Wide
| Floppy Disk Drive | |
| ||
| Tape backup Drive | |
| (optional) | |
| You can install a SCSI | |
| device in this expansion | |
| bay and connect it to the | |
| Ultra Wide | |
SCSI | One 5.25" Hard Disk Drive or two 3.5"Hard Disk Drives | |
can be installed on the floor of the server and | ||
PCI | ||
connected to the Ultra Wide | ||
Card | ||
Workgroup Server models come with a second Hard | ||
| ||
| Disk Drive [SCSI ID 1] installed here.) |
Replacement Note for
WS 9650 Only: After you swing the top chassis back into position and secure the green locking levers, you must reconnect the Ultra Wide SCSI cable to any lower drives that may be present. Important: You must also secure the Ultra Wide cable with the Velcro tie wrap that is on the bottom drive carrier so that the cable doesn’t interfere with the fan. The graphic at left shows the routing of the two SCSI cables in the WS 9650.
