Califone 2395AV-02, 2385AV-02 owner manual Pr

•To Pause press the ‘PLAY/PAUSE’ button while the disc is playing, the playing time will flash. Pressing the ‘PLAY/PAUSE’ button again will start the disc again from where it paused.

•To select a track to play, press the ‘SKIP FORWARD’ >>❘(20) or ‘SKIP BACK’ ❘<< (21) button either from ‘Stop’ or ‘Pause’. Each press will change the track number by one.

•If the CD is playing, pushing and holding the ‘SKIP’ >>❘button will advance through the current track until it is over, then proceed to advance through the next track as long as the button is held down. Conversely, pushing and holding the ‘SKIP’ ❘<< button will scan in the reverse direction through the track currently playing and continue through previous tracks as long as the button is held down.

•To stop playing the disc, press the ‘STOP’ button (22).

REPEAT PLAYING

•To repeat one track, press the ‘REPEAT’ button (23) one time either while playing or in pause.

One Track Repeat (Flashing)

Repeat Track

4:05 5

•To replay all tracks, press the ‘REPEAT’ button a second time either while playing or in pause.

•A third press of the ‘REPEAT’ button will cancel the repeat command.

MEMORY PROGRAMMING. Up to 16 tracks can be programmed.

With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip Forward’ >>❘or ‘Skip Back’ ❘<< button. Push the ‘PROGRAM’ button again to enter another track to save in memory. When finished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time exits the Program function. Note: When the CD door is opened all programming is cleared.

Program Input Mode		Choose Track 4
Memory	Track	Memory	Track
PR:01	— —	PR:01	04

Program Input Complete

MemoryTrack

PR:02 — —

Random Play Function

Pressing the ‘RANDOM’ button (24) during CD play or stop condition will engage random play. Pressing again will cancel the function. Note: If the CD has memory programmed, the random function cannot operate until the program is cleared.

Play Time Mode

Pressing the ‘PLAY TIME’ button (25) changes the time format on the LCD from elapsed time of each track to the total time remaining on the CD.

Dual Cassette Operation

The 2385AV-02 features a cassette for playback and recording from radio, CD and microphone. Since the 2385AV-02 is a single cassette unit, disregard all references to “Tape B” below. The 2395AV-02 features dual cassette decks for playback, continuous playback (Deck B to Deck A) and recording from tape, radio, microphone or CD on Deck A only.

Loading a Tape

To load a cassette tape, press the STOP/EJECT button (34) on Tape A or (35) on Tape B to open the cassette door. Insert tape with playing side label facing you. Close the cassette door to lock the tape in position. Note: While Deck A is in playback mode, Deck B must be stopped and not in PLAY or PAUSE mode for Deck A to playback.

Tape Playback

To play a loaded cassette tape:

1.Set FUNCTION button to TAPE

2.Press PLAY Deck A or B (38) (39)

3.Adjust VOLUME (7) (8)

4.Adjust TREBLE and BASS controls (9) (10) (11) (12)

To Stop Playback

Press the STOP/EJECT key (34) (35).

To Pause Playback

Press the PAUSE key (40) (41) all the way down to lock. To resume play, press the PAUSE key again, and release.

To Fast Wind/Rewind

Press the REWIND (42) (43) or FAST-FORWARD (44) (45) key. Press the STOP/EJECT key to stop winding at the desired position.

During fast winding, regular play, or recording, the tape will stop automatically when its end is reached.

OTHER FEATURES AND FUNCTIONS

Headphone Jacks. Two jacks are provided. One 3.5 mm jack (26) on top and one 1/4” phone jack (27) on the rear of the cabinet.

8 9