3
23. Safety knob Lever Lens plate
24. Bellows
25. Scale Swing (Tilt)
26. Scale Rise & Fall (Lateral Shift)
27. Scale Focus
28. Front Ring Bellows (3C)
29. ¼” Thumb Screw (3F)
These instructions describe the main functions of the X2-PRO camera system.
Firstly the set-up of the camera in general is described. Then the possible lenses and interfaces are
presented. Finally the way to work with this new camera system is pointed out.
3A. Checking your parts list
Remove all camera parts from the carton box. To make a complete system make sure that you have one of
each of the following:
- X2-PRO Camera Body (is completely assembled)
- Mountblock DSLR camera (see 3B)
- Bellows with bayonet fitting appropriate DSLR camera (see 3B)
- Lens Plate (see 3C)
- Lens (see 3C)
- Your DSLR camera
5
23
24
7
6
25
26
27