Cambridge Audio 640Razur user manual Remote control

Remote control

The 640R is supplied with an Azur Navigator remote control. Insert the supplied AAA batteries to use. For full details of the various adjustment functions available from the remote, refer to the later sections of this manual.

Standby/On

Switches the unit between Standby mode and On.

Analog Direct

Directly selects a stereo analog input for the current source with no A/D conversion or DSP processing.

Stereo Modes

Selects Stereo or Stereo + Sub modes for Analog or Digital sources (digitally processed).

PLIIx/Neo/DSP

Selects from various matrix encoded surround processing modes for analog or digital sources (digitally processed).

DD EX/DTS ES

Selects digital surround processing modes for Digital sources only.

Dynamic

Press repeatedly to reach the desired dynamic compression range (Dolby Digital or DTS modes only).

Sub On/Off

Press to turn on/off the output of the subwoofer. Also, hold down and then press the volume up and down buttons to adjust the overall sub level if desired.

PTY (Program Type Search)

Press to search by program type when in Tuner mode. Refer to the ‘Operating instructions’ section of this manual for more information.

APS (Auto Program Search)

Hold down for 4 seconds to allocate and memorise radio stations automatically.

Display

Press to view the current source material and decoding mode. When listening to FM with RDS, press to cycle round various RDS information modes.

Stereo Mono

When listening to FM, press to alternate between stereo and mono modes.

Store

Press to store the current frequency when in Tuner mode.

Mode

Press to select Auto/Manual or Preset tuning when in Tuner mode.

Mute

Mutes the audio on the AV Receiver. Press again to cancel mute.

Volume

Increase or decrease the volume of the AV receiver output. Also used as up/down in the OSD setup menus.

Analog	Stereo	PL IIx
Direct	Modes	Neo/DSP
DD EX	Dynamic	Sub
DTS ES		On/Off
PTY	APS	Display
Stereo	Store	Mode
Mono

Vol

Enter

Vol

	Bass	7.1
	Treble	Direct
Audio In		Video In
Type		Type
Tuner	DVD	Video 1
AM/FM
Video 2	Rec 1	Aux
CD		Rec 2

Tune / Left & Right

Press the right arrow to increase tuner frequency/change preset. Press the left arrow to decrease tuner frequency/change preset. Also used to scroll left/right in the OSD setup menus.

Enter

Used in the OSD setup menus.

On-Screen Display (OSD)

Press to turn on and off the on-screen set-up menus when connected to a monitor/screen via Composite, S-video or Component connections.

Bass/Treble

Press for bass/treble adjustment, using the Volume up/down buttons. Note: Bass/Treble is disabled in analog stereo direct and 7.1 direct modes.

7.1 Direct

Selects the 5.1/6.1/7.1 direct input.

Audio In Type

Switches the 640R between analog and digital inputs for the currently selected source.

Video In Type

Selects Composite video, S-Video or Component video as the analog video input type for the current source (Additionally HDMI can also be assigned in the OSD menu).

Tuner AM/FM, DVD, Video 1, Video 2, Rec 1, Aux, CD, Rec 2

Press the corresponding button to change the input source. Pressing the Tuner AM/FM button a second time toggles between AM and FM modes.

The above button descriptions are naturally brief. Please refer to the ‘Operating Instructions’ section of this manual for more information on the relevant functions implemented.

8