Cambridge Audio 651A user manual Technical specifications, Troubleshooting

Models: 651A

1 14
Download 14 pages 184 b
Page 12
Image 12
Technical specifications

Technical specifications

Troubleshooting

651A

Power output

THD (unweighted)

Frequency response (-1dB) S/N ratio (ref 1W)

Input impedances

Power Amp damping factor Max. power consumption Standby power consumption Bass/Treble controls

USB input

Dimensions (H x W x D)

Weight

75 watts (into 8Ω)

<0.002% @ 1kHz, 80% of rated power <0.03% 20Hz - 20kHz, 80% of rated power

<0.02% 20Hz - 20kHz @ 10W

5Hz - 50kHz

>92dB (unweighted)

47kohms

>100

600W

<1W @ rated mains

Shelving, ultimate boost/cut +/- 7.5dB @ 20Hz and 20kHz

USB Audio 1.0

16 bit 32kHz, 44.1kHz, 48kHz.

120 x 430 x 350mm

(4.7 x 16.9 x 13.8”)

8.4kg (18.5lbs)

There is no power

Ensure the AC power cord is connected securely.

Ensure the plug is fully inserted into the wall socket and is switched on. Check the unit is switched on at the rear panel.

Check fuse in the mains plug or adaptor.

There is no sound

Make sure the unit is not in Standby mode.

Check that the source component is properly connected. Check that your speakers are properly connected.

Check that the correct speaker outputs are switched on (‘Speaker A/B’ button on the remote control).

If source LED is flashing, turn ‘Mute’ off.

There is no sound on one channel

Ensure that balance control is in the correct position.

Check speaker connections.

Check interconnects.

There is a loud buzz or hum

Check turntable or tone arm for ground and connection lead fault. Ensure no interconnects are loose or defective.

Ensure that your tape deck or turntable is not too close to the amplifier.

Unable to make tape recordings

Check that ‘Rec Out’ has been connected correctly.

There is weak bass or diffused stereo imaging

Ensure that speakers are not wired out of phase.

The sound is distorted

Check that the volume or tone controls are not set too high.

Protection LED flashing

See section on CAP5 protection system.

The remote handset will not function

Check that the batteries have not expired.

Ensure that nothing is blocking the remote sensor.

In the event that the above solutions do not remedy your problem, please consult our frequently asked questions (FAQ) section on our website: www.cambridge-audio.com/sts/faqs

For all servicing, in or out of warranty, please contact your dealer.

12

Page 12
Image 12
Cambridge Audio 651A user manual Technical specifications, Troubleshooting