840C Upsampling compact disc player
6Control Bus
In - Allows
Out - Loop out for control bus commands to another unit.
7Digital outputs
The digital outputs allow a separate DAC or digital recording device to be connected. The sophisticated DSP software in the 840C even allows these outputs to be set to output raw (pass through) or upsampled data independently from the main audio outputs. Refer to the ‘Operating instructions’ section for more information.
S/P DIF
Toslink Optical Digital - Use a high quality TOSLINK fibre optic interconnect cable designed specifically for audio use.
Only one of the two output types should be used at a time.
8& 9 Digital Inputs 1 / 2
The digital inputs allow the digital outputs of other source components to be connected to the 840C. The 840C can then act as a very high quality upsampling DAC, improving the sound quality of the connected sources. Two digital inputs allow two external sources to be connected:
S/P DIF
Toslink Optical Digital - Use a high quality TOSLINK fibre optic interconnect cable designed specifically for audio use.
Only one of the two input types for each input should be used at a time.
10Unbalanced Audio Out
11Balanced Audio Out
The 840C also features true balanced (XLR) outputs. This is a higher quality output that can reject noise and interference in the cable when used with equipment with balanced inputs. XLR connectors should be wired: Pin 1 - Ground; Pin 2 - Hot
Azur upsampling compact disc player 7