CONNECTIONS
1 | 2 | 3 | 4 | 5 |
REAR PANEL CONNECTIONS
1.NCT (NATURAL CONTOUR TECHNOLOGY)
Use this switch to select either a flat frequency response or one of two subtle tone settings; LO or LO/HI.
2.TUNER INPUT
Connect the conventional ‘left’ and ‘right’ (L and R) Audio Outputs of an existing tuner to the ‘Tuner Input’ using a high quality interconnect.
3.AUDIO OUTPUT
Use high quality interconnect cables from these sockets to any line level input on your amplifier.
6
4.OPTICAL SPDIF OUTPUT
Use this socket to connect to the input of a separate DAC or digital recording machine. Use a high quality fibre optic interconnect cable designed specifically for audio use.
5.PHONO SPDIF OUTPUT
This coaxial output is for input to a separate DAC or digital recording machine. Use a high quality 75 ohm BNC interconnect cable for this connection (not one designed for normal audio use).
6.AERIAL SOCKET
Connect the supplied aerial or a separately purchased outdoor aerial to this
5