Cambridge Audio DVD99 user manual Front panel controls, Remote control

Front panel controls

12

3	4	1080p
		1080i
		720p
		480/576
		USB 2.0

Power

1Power

CD/SACD/DVD-Audio Player 1080p Upscale HDMI with USB

				10
Open/Close	Play/Pause	Stop	Upscale	9
5	6	7	8

10Resolution indicators

Switches the unit on and off.

2Disc tray

DVD/Compact Disc tray. Use the Open/Close button to activate.

3IR sensor

Receives IR commands from the supplied remote control. A clear unobstructed line of sight between the remote control and the sensor is required.

4Display

Used to display the DVD99’s functions and playback state etc.

5Open/Close

Allows you to open and close the disc tray for loading of discs. Pressing Play will also close the tray and start playing a disc if one is loaded.

6Play/Pause

Plays the disc and pauses (freezes) play when playing.

Indicates which HDMI resolution is in use:

1080p - Upscaled at 1080 lines progressive

1080i - Upscaled at 1080 lines interlaced

720p - Upscaled at 720 lines progressive

480/576 - Native NTSC/PAL resolution

Remote control

The DVD99 is supplied with a remote control. Insert the 2 supplied AAA batteries to activate.

For further details of the various	Eject
adjustment functions available,
refer to the later sections of this
manual.

7Stop

Press once to stop playback. Pressing Play will cause the playback to be re-started from the same position. Press again to fully stop playback.

8Upscale

When playback is completely stopped press to switch the video output resolution. Select the resolution that produces the best picture quality on your TV. For most flat panels and DLP™, LCD or LCoS (SXRD™, D- ILA™) rear projection televisions this will be 720p. For CRT rear projection televisions this will likely be 1080i. For non HD displays (very rare if they have HDMI or DVI) this will be 480p.

9USB port

Port for interfacing to a flash/memory card or "Mass Storage Device".

Notes:

•Only USB 2.0 certified products with the USB 2.0 logo on them are supported by the DVD99. Please either consult the manufacturer of the USB 2.0 product to make sure it is properly certified, or go to www.usb.org for a list of approved products, before purchase. We cannot be held responsible for any incompatibility issues.

•This unit supports "USB Mass Storage Class Bulk-Only Transport" devices only. Most USB thumbs drives, portable hard disk drives and card readers conform to this device class. Other USB devices such as MP3 players, digital cameras, and mobile phones may not be compatible.

•Supported USB drives must be formatted with the FAT (File Allocation Table) or FAT32 file system. Drives formatted with NTFS file system are not supported.

Standby/On

Switches the unit between On and Standby mode.

Eject

Opens and closes the disc tray.

Numerical buttons

Press the number of a desired chapter or track to go directly to it. For a number greater than ten, press 10+ followed by the number(s) required.

Go To

Press once to access Chapter Selection then enter the required chapter via the numerical buttons. Press twice to access Disc Time Selection and enter the required time from the start of the disc as H:MM:SS (Hours, Minutes, Seconds). Press three times to access Chapter Time Selection and enter the required time from the start of the chapter.

			Go To
Audio	Subtitle	Angle	Zoom
Title			Menu
	Enter
Setup			Return
Play	Pause/Step	Stop
			Vol
Slow	CD	Mute
	Mode
Info	Repeat	A-B	Clear
	Scan		Skip
HDMI	USB	PAL/	OSD
Upscale		NTSC

6