LK10
For the LK10 to receive commands, it must be first put into Learn mode. The LK10 has a series of menus that can be accessed by pressing and holding the Shift/Set button on the front panel. The menu options are continuously scrolled on the LK10 display until you release the Shift/Set button.
Follow the next steps to complete the cloning operation:
LK10 keypad - Receiving data | LR10 remote - Transmitting data |
ENGLISH
1 | 2 |
1.Press and hold the Set button for five 
seconds. When ‘LEARN’ is displayed, release the button. ‘READY’ will then be displayed on screen.
4 | 3 |
2.Press the 
button on the remote until ‘TRX’ is flashing.
4.‘RXING..’ will then be displayed, to indicate it is receiving data.
3.Press the Enter button on the remote. Display shows ‘SENDING’.
11
