![](/images/new-backgrounds/1038217/3821713x1.webp)
LK10
Power requirement
The LK10 runs on 24V DC (@ 250mA max) supplied through the connecting cable from the KP10 keypad. As such there is no mains voltage present in the KP10 and the unit is often safe to fit in areas where only extra low voltage (ELV) equipment is permitted. However, it is imperative that you always check the wiring regulations in force for your application and area.
Faceplates
The LK10 faceplate system is based on the DecoraTM standard and is interchangeable with the wide range of faceplates made by manufacturers such as Leviton etc that conform to this standard. If it is desired to fit another faceplate, it can be replaced by gently prising apart the LK10 faceplate and snapping on another in its place.
ENGLISH
Approvals
This product complies with European Low Voltage (73/23/EEC) and Electromagnetic Compatibility (89/336/EEC) Directives when used and installed according to this instruction manual. For continued compliance only Cambridge Audio accessories should be used with this product and servicing must be referred to
qualified service personnel.
The should not be disposed of with unsorted regular waste. Please return the unit or
contact the authorised dealer from whom you purchased this product for more information.
7