Operating Instructions and Parts Manual | AL2810 |
Airless Paint Systems
Table of Contents
Description . . . . . . . . . . . . . . . . . . | 2 | Service . . . . . . . . . . . . | . . . . . . . | . 10 |
Specifications . . . . . . . . . . . . . . . . . | 2 | Fluid Pump . . . . . . . . . | . . . . . . . | . 10 |
Safety Guidelines . . . . . . . . . . . . . . . | . 2 | Inlet Valve . . . . . . . . . | . . . . . . . | . 11 |
General Safety Information . . . . . . . . . . . | . 2 | Outlet Valve . . . . . . . . . . . . . . . . . | . . . . . . . . . . . . . . . 11 | |
4 | Clutch Replacement . . . . . | . . . . . . . . 11 | ||
Flushing . . . . . . . . . . . . . . . . . . | 4 | Maintenance . . . . . . . . . . . . . . . . . 12 | ||
How to Flush . . . . . . . . . . . . . . . . | 4 | Regular Maintenance . . . . . | . . . . . . . | 12 |
Setting Up . . . . . . . . . . . . . . . . . | 5 | Oil and Lubrication Procedure . | . . . . . . . | . 13 |
Spray Tip Selection . . . . . . . . . . . . . | . 5 | . . . . . . . | 13 | |
Operation . . . . . . . . . . . . . . . . . . | . 7 | Troubleshooting Charts . . . . . | . . . . . . . | . 14 |
Starting Up . . . . . . . . . . . . . . . . | . 7 | Parts Diagrams and Parts Lists . . . | . . . . . . . | 18 |
Spray Technique . . . . . . . . . . . . . . | . 8 | Warranty . . . . . . . . . . . | . . . . . . . | . 32 |
Electrical System . . . . . . . . . . . . . . . . | 8 |
|
|
|
Replacement of Electrical Control Board . . . . | . 8 |
|
|
|
Pressure Calibration on Electrical Board . . . . . | 9 |
|
|
|
Description
Airless paint sprayers are capable of spraying a wide variety of latex, oil- based, and alkyd paints, as well as stains, preservatives and other non- abrasive finishes.
These sprayers are also powerful and versatile enough to be used with a variety of options (roller attachment, extra lengths of hose, etc.) to make it an even more efficient tool.
NOTE: Guns pictured in illustrations may be different than the one included with your unit.
Specifications
Max. Pressure. . . . . . . .3000 psi Output . . . . . . . . . . 1.5 GPM Tip size . . . . . . 1 gun up to 0.041 2 guns up to 0.028 Engine. . . . . . . . 5.5HP Honda
Weight . . . . . . . . . . 160 lbs.
Safety Guidelines
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates an imminently
hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not avoided, could result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not avoided, MAY result in minor or moderate injury.
Notice indicates important
information, that if not followed, may cause damage to equipment.
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.
Do not operate unit if damaged
during shipping, handling or use. Damage may result in bursting and cause injury or property damage.
General Safety
Information
1.Read all manuals included with this product carefully. Be thoroughly familiar with the controls and the proper use of the equipment.
2.Always wear a mask or respirator and eye protection when painting. Be certain mask or respirator will provide necessary protection against inhalation of harmful vapors.
3.Keep visitors away and NEVER allow children or pets in the work area.
www.chpower.com
2