Appendix A. Camera Enclosures
2. CC4718 Enclosure
The CC4718 Enclosure is an outdoor enclosure that can be used to house the
CC640 camera.
The FIN6COND cable would normally be used to carry power from the supply to
the camera. This cable also supplies enough conductors to use RS-485 or RS-232
communications to send images to a datalogger using PakBus. If RS-232
communications are required, then the C2006 adapter board is required.
Campbell Scientific supplies a knockout seal, which can be used to plug the
unused entry port.
Figure A-2 CC4718 Enclosure with mounting location of optional Serial Interface Board (C2006)
A-3