See Warranty on page 6 for important information about commercial use of this product.
Operating Instructions and Parts Manual | DG190600CK and DG190625DI |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
BUILT TO LAST
Variable Speed Hammer Drill
Description
Hammer drills provide short, rapid hammer thrusts at the same time the bit turns. By adding impact to the drilling tip, the material is actually pulverized, increasing the efficiency of the drilling process and keeping the tip of the bit cooler. This hammer drill can be used in a normal drilling mode as well. Other features include
Unpacking
When unpacking this product, carefully inspect for any damage that may have occurred during transit.
General Safety
Information
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates
an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates
a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates
a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.
Notice indicates
important information, that if not followed, may cause damage to equipment.
CALIFORNIA PROPOSITION 65
You can create dust when you cut, sand, drill or grind materials such as wood,
paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
Warning This
product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
The following safety precautions must be followed at all times along with any other existing safety rules.
1. Read all manuals included
with this product carefully.
Be thoroughly familiar MANUAL with the controls and the proper use of the
equipment.
2.Only persons well acquainted with these rules of safe operation should be allowed to use the tool.
Safety glasses and ear protection must be worn during operation.
Specifications
Voltage | 120 V, 60 Hz |
Chuck Size | 1/2" (13 mm) |
Max Bit Size | 1/2" (13 mm) |
Blows per Minute | 42,000 |
RPM | 0 - 3000 |
Power Rating | 6 Amps |
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2007 Campbell Hausfeld/Scott Fetzer
For parts, product & service information | IN713303AV 8/07 |
visit www.chpower.com