Campbell Hausfeld DG190600CK, DG190625DI Information (Cont’d.), General Power Tool, Safety Warnings, General Safety, PERSONAL SAFETY, WORK AREA SAFETY, AWG Size of Cord, ELECTRICAL SAFETY

Operating Instructions and Parts Manual

General Safety

Keep

1. Make sure cord is located so that it

children

will not be stepped on, tripped

Information (Cont’d.)

and bystanders away while operating a

over, or otherwise subjected to

power tool. Distractions can cause you

damage or stress.

3. Do not wear loose fitting clothing,

to lose control.

2. Do not use an extension cord unless

scarves, or neck ties in work area.

Loose clothing may become caught

ELECTRICAL SAFETY

absolutely necessary. Use of

in moving parts and result in serious

improper extension cord could

personal injury.

result in a risk of fire and electric

4. Do not wear jewelry when

shock.

Power tool plugs must match

If an extension cord must be used,

operating any tool. Jewelry may

the outlet. Never modify the

become caught in moving parts and

plug in any way. Do not use

make sure:

result in serious personal injury.

any adapter plugs with earthed

• That the pins on plug of

5. Always use attachments designed

(grounded) power tools. Unmodified

extension cord are the same

plugs and matching outlets will reduce

number, size and shape as those

for use with this tool. Do not use

risk of electric shock.

of plug.

damaged or worn attachments.

Avoid

• That the extension cord is

6. Never trigger the tool when not

body

properly wired and in good

applied to a work object.

contact with earthed or grounded sur-

electrical condition.

Attachments must be securely

faces, such as pipes, radiators, ranges

• If an extension cord is to be used

attached. Loose attachments can

and refrigerators. There is an increased

cause serious injury.

risk of electric shock if your body is

outdoors it must be marked with

earthed or grounded.

the suffix “W-A” or “W”

7. Never point a tool at oneself or any

Do not

following the cord type

other person. Serious injury could

expose

designation to indicate it is

occur.

power tools to rain or wet conditions.

acceptable for outdoor use. For

8. Use steady, even pressure when

Water entering a power tool will

example – SJTW-A

using tool. Do not force. Too much

increase the risk of electric shock.

3. Do not expose to rain, snow or

pressure can cause drill to break or

Do not

frost.

overheat.

abuse

4. Do not operate tool with damaged

9. Keep all nuts, bolts and screws tight

the cord. Never use the cord for carry-

ing, pulling or unplugging the power

cord or plug.

and ensure equipment is in safe

tool. Keep cord away from heat, oil,

• Have a damaged or worn power

working condition.

sharp edges or moving parts. Damaged

cord and/or strain relief replaced

10. Do not put hands near or under

or entangled cords increase the risk of

immediately.

moving parts.

electric shock.

• Do not attempt to repair power

When

cord.

General Power Tool

operat-

ing a power tool outdoors, use an

PERSONAL SAFETY

Safety Warnings

extension cord suitable for outdoor

use. Use of a cord suitable for outdoor

Stay

use reduces the risk of electric shock.

Read all

If operat-

alert,

safety

watch what you are doing and use

warnings and all instructions. Failure

ing a

common sense when operating a

to follow the warnings and instruc-

power tool in a damp location is

power tool. Do not use a power tool

tions may result in electric shock, fire

unavoidable, use a residual current

while you are tired or under the influ-

and/or serious injury.

device (GFCI) protected supply. Use of a

ence of drugs, alcohol or medication. A

Save all warnings and instructions for

GFCI reduces the risk of electric shock.

moment of inattention while operating

Hold

power tools may result in serious per-

future reference.

power

sonal injury.

The term "power tool" in the warnings

tools by insulated gripping surfaces

when performing an operation where

refers to your mains-operated (corded)

the cutting tool may contact hidden

Use personal protective

power tool or battery-operated (cord-

wiring or its own cord. Contact with a

equipment. Always wear eye

less) power tool.

“live” wire will make exposed metal

protection. Protective equip-

parts of the tool “live” and shock the

ment such as dust mask, non-skid safe-

WORK AREA SAFETY

operator.

ty shoes, hard hat, or hearing protec-

Keep

Double insulated tools are equiped with

tion used for appropriate conditions

work

a polarized plug (one plug blade is wider

will reduce personal injuries.

area clean and well lit. Cluttered or

that the other). This plug will fit in a

dark areas invite accidents.

polarized outlet only one way. If the plug

does not fit fully into the outlet, turn the

plug over and insert into plug again.

Do not operate power tools

in explosive atmospheres,

Minimum Wire Size (AWG) of Extension Cord

such as in the presence of

Length of Cord in Feet

100

150

flammable liquids, gases or dust.

Power tools create sparks which may

ignite the dust or fumes.

AWG Size of Cord