DG480200CK
Notes
Notes
Notas
See Warranty on page 5 for important information about commercial use of this product.
Operating Instructions and Parts Manual | DG480200CK |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Sheet Sanders
BUILT TO LAST
Description
Sheet sanders are designed for the sanding and polishing of wood, iron, plastic, and similar materials. This sander has a dust bag to keep the working surface clean and dust free.
This sander has a
Unpacking
When unpacking this product, carefully inspect for any damage that may have occurred during transit.
General Safety
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates
! DANGER an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates
! WARNING a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Caution indicates a
! CAUTION potentially
CALIFORNIA PROPOSITION 65
!DANGER Youcan
create dust when you cut, sand, drill or grind materials such as wood,
paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
! WARNING This product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
The following safety precautions must be followed at all times along with any other existing safety rules.
!WARNING Safety
glasses and ear protection must be worn during operation.
3.Do not wear loose fitting clothing, scarves, or neck ties in work area. Loose clothing may become caught in moving parts and result in serious personal injury.
4.Do not wear jewelry when operating any tool. Jewelry may become caught in moving parts and result in serious personal injury.
5.Always use attachments designed for use with this tool. Do not use damaged or worn attachments.
6.Never trigger the tool when not applied to a work object.
hazardous situation which, if not avoided, may result in minor or moderate injury.
Notice indicates
NOTICE important information, that if not followed, may cause damage to equipment.
1.Read all manuals included with this product carefully. Be
thoroughly familiar with the controls and the proper use of the equipment.
MANUAL
Specifications
Tool |
|
|
Voltage | 120V | 60Hz |
Power Rating | 1.5 A |
|
2.Only persons well acquainted with these rules of safe operation should be allowed to use the tool.
Sanding Surface | 1/4 sheet |
Weight | 3.1 lbs. |
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2006 Campbell Hausfeld/Scott Fetzer | For parts, product & service information | IN713700AV 3/06 |
|
|
16 | visit www.chpower.com |
|
