Pressure Washer
Symptom
Possible Cause(s) | Corrective Action |
|
|
Pressure washer will not spray detergent
1.Nozzle not pushed up far enough
2.Clog, kink, or hole in detergent suction hose
3.Hose length too long
4.Lance not functioning properly
1.Push nozzle forward as far as it will go..
2.If clean, unkink or replace hose..
3.Use only hose length provided with initial purchase of pressure washer.. Detergent suction will not function if more than once section of hose is attached to unit..
4.Remove lance from gun.. If detergent is dispensed through gun, the lance must be replaced.. If not detergent is dispensed through gun, remove 1 inch tapered detergent barb from pump.. Clean the barb, and make sure that ball and spring are properly aligned with tapered portion of the spring facing the ball.. The ball should be on top of the spring..
Notes
15 | www.chpower.com |
|