Campbell Hausfeld IN715401AV, NB003008 (Continued), Tool Components and Specifications, Important Safety Instructions

Operating Instructions

Important Safety Instructions				able to create sparks resulting in the			better control of the tool in
(Continued)				ignition of the dust or fumes..			unexpected situations..
General			c..	Keep bystanders, children, and		e..	Use safety equipment. A dust mask,
a..	To reduce the risks of			visitors away while operating the			non-skid safety shoes and a hard
				tool. Distractions are able to result in			hat must be used for the applicable
	electric shock, fire, and
				the loss of control of the tool..			conditions..
	injury to persons, read all
	the instructions before		Personal Safety			f..	Always wear eye
	using the tool.		a..	Stay alert. Watch what you are			protection.
b.	Be thoroughly familiar with the					g.. Always wear hearing
				doing and use common sense
	controls and the proper use of the						protection when using
				when operating the tool. Do not
	equipment.. Follow all instructions..						the tool. Prolonged exposure to
				use the tool while tired or under
	Contact your Campbell Hausfeld						high intensity noise is able to cause
				the influence of drugs, alcohol,
	representative if you have any						hearing loss..
				or medication. A moment of
	questions..
				inattention while operating the		h.. Do not attach the hose or tool to
c.	Only persons well acquainted with			tool increases the risk of injury to			your body. Attach the hose to the
	these rules of safe operation should			persons..			structure to reduce the risk of loss of
	be allowed to use the unit..		b..	Dress properly. Do not wear loose			balance if the hose shifts..
		Read and
				clothing or jewelry. Contain long		i..	Always assume that the tool
		understand tool		hair. Keep hair, clothing, and			contains fasteners. Do not point
labels and manual. Failure to follow
				gloves away from moving parts.			the tool toward yourself or anyone
warnings, dangers, and cautions could
				Loose clothes, jewelry, or long			whether it contains fasteners or not..
result in DEATH or SERIOUS INJURY.
Work Area				hair increases the risk of injury to		j.		Do not nail on
				persons as a result of being caught
								top of another
a..	Keep the work area clean and well
				in moving parts..			nail. This is able to cause the nail to
	lighted. Cluttered benches and dark		c..	Avoid unintentional starting.			be deflected and hit someone, or
	areas increase the risks of electric						cause the tool to react and result in a
				Be sure the switch is off before
							risk of injury to persons.
	shock, fire, and injury to persons..
				connecting to the air supply. Do not		k..		Remove finger
b.. Do not operate the tool				carry the tool with your finger on
								from the trigger
	in explosive atmospheres,			the switch or connect the tool to th
							when not driving fasteners. Never
	such as in the presence			air supply with the switch on..			carry the tool with finger on trigger,
	of flammable liquids,		d..	Do not overreach. Keep proper			the tool is able to fire a fastener.
	gases, or dust. The tool is
				footing and balance at all times.
				Proper footing and balance enables
Tool Components and Specifications					Cap Exhaust

•Requires: 0..4 Average SCFM with 10 fasteners per minute @ 90 psi

•Air inlet: 1/4 inch NPT

•STAPLE SIZE RANGE: 3/8 inch to 1-1/4 inch

•MAGAZINE CAPACITY:

100 Nails per load, 18 gauge

•WEIGHT: 2 lbs.., 13 oz..

•LENGTH: 10 inch

•HEIGHT: 9-1/8 inch

•MAXIMUM PRESSURE: 100 psi

•PRESSURE RANGE: 60 psi – 100 psi

	Trigger	Magazine
	Adjustable Depth	Latch
Quick		Button
Clear	Control
Nose
Work	Nail Loading Area
Contact
Element
(WCE)	Nail Discharge Area

www.chpower.com

2