Campbell Hausfeld IN717702AV 3

Operating Instructions			SB504000
Important Safety Instructions		Never use	Always assume the
(Continued)		gasoline	tool contains
(Continued)		or other ﬂammable liquids	fasteners. Respect the tool as a working
TOOL USE AND CARE		or other ﬂammable liquids	fasteners. Respect the tool as a working
TOOL USE AND CARE		to clean the tool. Never use	implement; no horseplay. Always keep
a.	Use clamps or another practical way	the tool in the presence of	others at a safe distance from the work
	to secure and support the workpiece	ﬂammable liquids or gases. Vapors	area in case of accidental discharge of
	to secure and support the workpiece	could ignite by a spark and cause an	fasteners. Do not point the tool toward
	to a stable platform. Holding the		fasteners. Do not point the tool toward
			yourself or anyone whether it contains
		explosion which will result in death or	yourself or anyone whether it contains
	work by hand or against the body is	explosion which will result in death or	fasteners or not. Accidental triggering
	work by hand or against the body is	serious personal injury.	fasteners or not. Accidental triggering
	unstable and is able to lead to loss	Do	of the tool could result in death or
	unstable and is able to lead to loss		serious personal injury.
	of control.		serious personal injury.
	of control.	not	Do
b. Do not force the tool. Use the		remove, tamper with,	Do
		remove, tamper with,	not
		or otherwise cause the	not
	correct tool for the application. The	or otherwise cause the	drive a fastener on top
	correct tool for the application. The	trigger lock or trigger	drive a fastener on top
	correct tool will do the job better	trigger lock or trigger	of other fasteners. The
	correct tool will do the job better	to become inoperable.	of other fasteners. The
	and safer at the rate for which the	to become inoperable.	fastener could glance
		Do not operate any	fastener could glance
		Do not operate any	and cause death or a
	tool is designed.	tool which has been modiﬁed in a like	and cause death or a
	tool is designed.	tool which has been modiﬁed in a like	serious puncture wound.
c.	Do not use the tool if the switch	fashion. Death or serious personal
c.	Do not use the tool if the switch	injury could result.	! WARNING
	does not turn the tool on or off. Any	injury could result.

		Do	Do not operate or allow
	tool that cannot be controlled with	Do	Do not operate or allow
	tool that cannot be controlled with	not	anyone else to operate
	the switch is dangerous and must be	not	anyone else to operate
	the switch is dangerous and must be	touch the trigger unless	the tool if any warnings
	repaired.	touch the trigger unless	the tool if any warnings
	repaired.	driving fasteners. Never	or warning labels are not legible.
d.	Disconnect the	attach air line to tool or	Warnings or warning labels are located
d.	Disconnect the	carry tool while touching the trigger.	on the tool magazine and body.
	tool from the air	carry tool while touching the trigger.	on the tool magazine and body.
	tool from the air	The tool could eject a fastener which	Do not drop or
	source before making adjustments,	The tool could eject a fastener which
	source before making adjustments,	will result in death or serious personal
	doing tool maintenance, clearing	will result in death or serious personal	throw the tool.
	doing tool maintenance, clearing	injury. Also actuate the trigger lock to	throw the tool.
	jams, leaving work area,loading,	injury. Also actuate the trigger lock to	Dropping or throwing the tool can
	jams, leaving work area,loading,	the safe position when not in use.	Dropping or throwing the tool can
	or unloading the tool. Such	the safe position when not in use.	result in damage that will make the tool
	or unloading the tool. Such		result in damage that will make the tool
	precautionary measures reduce the		unusable or unsafe. If the tool has been
	risk of injury to persons.		dropped or thrown, examine the tool
	risk of injury to persons.	Always disconnect the	closely for bent, cracked or broken parts
e.	Store the tool when it is idle out		closely for bent, cracked or broken parts
			and air leaks. STOP and repair before
		tool from the power	and air leaks. STOP and repair before
	of reach of children and other	tool from the power	using or serious injury could occur.
	of reach of children and other	source when unattended, performing	using or serious injury could occur.
	untrained persons. A tool is	any maintenance or repair, clearing	Avoid using the
	dangerous in the hands of untrained	a jam, or moving the tool to a new	tool when the
	users.	location. Do not load the tool with	magazine is empty. Accelerated wear on
	users.	fasteners when the trigger is depressed.	the tool may occur.
		fasteners when the trigger is depressed.
f.	Maintain the tool with care. Keep	The tool could eject a fastener causing
f.	Maintain the tool with care. Keep	The tool could eject a fastener causing	Clean and check all
	a cutting tool sharp and clean. A	death or serious personal injury.	Clean and check all
		death or serious personal injury.	air supply hoses
			air supply hoses
	properly maintained tool, with sharp		and ﬁttings before connecting the
	cutting edges reduces the risk of	Always ﬁt tool with a	tool to an air supply. Replace any
	binding and is easier to control.	Always ﬁt tool with a	damaged or worn hoses or ﬁttings.
		ﬁtting or hose coupling	damaged or worn hoses or ﬁttings.
			Tool performance or durability may be

g.	Check for misalignment or binding	on or near the tool in
g.	Check for misalignment or binding	on or near the tool in	reduced.
	of moving parts, breakage of parts,	such a manner that all
	of moving parts, breakage of parts,	compressed air in the tool is discharged	SERVICE
	and any other condition that affects	compressed air in the tool is discharged
		at the time the ﬁtting or hose coupling
		at the time the ﬁtting or hose coupling	a. Tool service must be performed only
	the tool’s operation. If damaged,	is disconnected. Do not use a check	a. Tool service must be performed only
	have the tool serviced before using.	valve or any other ﬁtting which allows	by qualified repair personnel.
	Many accidents are caused by poorly	air to remain in the tool. Death or	b. When servicing a tool, use only
	Many accidents are caused by poorly	serious personal injury could occur.	b. When servicing a tool, use only
	maintained tools. There is a risk of	Never	identical replacement parts. Use
	bursting if the tool is damaged.	Never	only authorized parts.
	bursting if the tool is damaged.	place	only authorized parts.
h.	Use only those fasteners listed	hands or any other body	c. Use only the lubricants supplied
	in the Accessories section of this	parts in the fastener	with the tool or specified by the
	in the Accessories section of this	discharge area of the tool.	with the tool or specified by the
	manual. Fasteners not identified	discharge area of the tool.	manufacturer.
	manual. Fasteners not identified	The tool might eject a fastener and	manufacturer.
	for use with this tool by the tool	could result in death or serious personal	Do not make any
	manufacturer are able to result in	injury.	modiﬁcations to
	a risk of injury to persons or tool	Never	the tool without ﬁrst obtaining written
	damage when used in this tool.	carry	approval from Campbell Hausfeld. Do
i.	Selecting an appropriate tool	the tool by the air hose	not use the tool if any shields or guards
i.	Selecting an appropriate tool	or pull the hose to move	are removed or altered. Do not use the
	actuation system, taking into	the tool or a compressor.	tool as a hammer. Personal injury or
	consideration the work application	Keep hoses away from	tool damage may occur.
	for which the tool is used.	heat, oil and sharp
	for which the tool is used.	edges. Replace any hose
		edges. Replace any hose
		that is damaged, weak or
		worn. Personal injury or
		tool damage could occur.
		3	www.chpower.com