Campbell Hausfeld IN724801AV, SB303000 3

Operating Instructions

SB303000

Important Safety Instructions

Remove finger

for use with this tool by the tool

(Continued)

from the trigger

manufacturer are able to result in

when not driving fasteners. Never

a risk of injury to persons or tool

PERSONAL SAFETY

carry the tool with finger on trigger,

damage when used in this tool.

Stay alert. Watch what you are

the tool is able to fire a fastener.

i. Selecting an appropriate tool

Always remain in a

doing and use common sense

actuation system, taking into

when operating the tool. Do not

ﬁrmly balanced

position when using or handling the

consideration the work application

use the tool while tired or under

tool.

for which the tool is used.

the influence of drugs, alcohol,

Avoid long extended

Never use

or medication. A moment of

periods of work

gasoline

inattention while operating the

with the tool. Stop using the tool if you

or other ﬂammable liquids

tool increases the risk of injury to

feel pain in hands or arms.

to clean the tool. Never use

persons.

TOOL USE AND CARE

the tool in the presence of

Dress properly. Do not wear loose

ﬂammable liquids or gases. Vapors

Use clamps or another practical way

could ignite by a spark and cause an

clothing or jewelry. Contain long

to secure and support the workpiece

explosion which will result in death or

hair. Keep hair, clothing, and

serious personal injury.

to a stable platform. Holding the

gloves away from moving parts.

work by hand or against the body is

Loose clothes, jewelry, or long

not

unstable and is able to lead to loss

hair increases the risk of injury to

remove, tamper with,

of control.

persons as a result of being caught

or otherwise cause the

b. Do not force the tool. Use the

trigger lock or trigger

in moving parts.

correct tool for the application. The

to become inoperable.

Avoid unintentional starting.

Do not operate any

correct tool will do the job better

Be sure the switch is off before

tool which has been modiﬁed in a like

and safer at the rate for which the

connecting to the air supply. Do not

fashion. Death or serious personal

tool is designed.

injury could result.

carry the tool with your finger on

Do not use the tool if the switch

the switch or connect the tool to the

does not turn the tool on or off. Any

not

air supply with the switch on.

touch the trigger unless

tool that cannot be controlled with

Do not overreach. Keep proper

driving fasteners. Never

the switch is dangerous and must be

footing and balance at all times.

attach air line to tool or

repaired.

carry tool while touching the trigger.

Proper footing and balance enables

Disconnect the

The tool could eject a fastener which

better control of the tool in

will result in death or serious personal

tool from the air

unexpected situations.

injury. Also actuate the trigger lock to

source before making adjustments,

the safe position when not in use.

e. Use safety equipment. A dust mask,

doing tool maintenance, clearing

non-skid safety shoes and a hard

jams, leaving work area,loading,

hat must be used for the applicable

or unloading the tool. Such

precautionary measures reduce the

Always disconnect the

conditions.

risk of injury to persons.

tool from the power

Always wear eye

Store the tool when it is idle out

source when unattended, performing

protection.

any maintenance or repair, clearing

of reach of children and other

a jam, or moving the tool to a new

Always wear hearing

untrained persons. A tool is

location. Do not load the tool with

protection when using

dangerous in the hands of untrained

fasteners when the trigger is depressed.

the tool. Prolonged

users.

The tool could eject a fastener causing

death or serious personal injury.

exposure to high intensity

Maintain the tool with care. Keep

noise is able to cause

a cutting tool sharp and clean. A

hearing loss.

properly maintained tool, with sharp

Always ﬁt tool with a

h. Do not attach the hose or tool to

cutting edges reduces the risk of

ﬁtting or hose coupling

on or near the tool in

your body. Attach the hose to the

binding and is easier to control.

such a manner that all

structure to reduce the risk of loss of

Check for misalignment or binding

compressed air in the tool is discharged

balance if the hose shifts.

at the time the ﬁtting or hose coupling

of moving parts, breakage of parts,

is disconnected. Do not use a check

Always assume that the tool

and any other condition that affects

valve or any other ﬁtting which allows

contains fasteners. Do not point

the tool’s operation. If damaged,

air to remain in the tool. Death or

the tool toward yourself or anyone

have the tool serviced before using.

serious personal injury could occur.

whether it contains fasteners or not.

Many accidents are caused by poorly

Never

Do not nail on

maintained tools. There is a risk of

place

bursting if the tool is damaged.

hands or any other body

top of another

parts in the fastener

nail. This is able to cause the nail to

Use only those fasteners listed

discharge area of the tool.

be deflected and hit someone, or

in the Accessories section of this

The tool might eject a fastener and

cause the tool to react and result in a

could result in death or serious personal

manual. Fasteners not identified

risk of injury to persons.

injury.