Operating Instructions and Assembly Instructions

Airless Paint Sprayers

Storage

short term

(less than one week)

WEAR ALL NECESSARY

SAFETY GEAR

Necessary Tools / Materials:

•Pump Protector Solution

•Plastic Wrap

•3/4 in. or Adjustable Wrench Oil or Alkyd Based Paint

If sprayer cleaned with mineral spirits, simply wrap suction filter housing

in plastic to keep debris out of suction filter. No other preparation is necessary.

Water-based paint

1.Prepare Pump Protector solution in bucket as directed on container.

2.Place suction assembly into solution.

3.Place end of bypass tube into waste bucket.

4.With prime/spray control in PRIME position, turn pressure to HIGH (completely clockwise).

5.Turn power switch ON. Circulate Pump Protector through bypass tube until bucket of solution is

EMPTY.

6.Turn pressure to LOW (completely counterclockwise).

7.Wrap suction filter housing in plastic to keep debris out of suction filter.

long term

(more than one weeK)

8.Remove high pressure hose and drain. Reassemble high pressure hose to pump.

9.With spray tip attached to spray gun, wrap tip with plastic to protect tip.

Water Based Paint

1

2

 

Pump

 

Protector

 

 

WASTE

 

BUCKET

 

PUMP

 

PROTECTION

 

SOLUTION

Prepare Pump

Place Suction

Assembly in

Protector Solution

Solution

 

4 3

WASTE

WASTE

BUCKET

BUCKET

 

PUMP

PUMP

PROTECTION

PROTECTION

SOLUTION

SOLUTION

 

Place End of Bypass Tube

With Prime/Spray

into Waste Bucket

Control in PRIME

 

Position, Turn

Pressure to HIGH

(completely clockwise)

6

7

 

Wrap Suction Filter

Housing in Plastic

Turn Pressure to LOW

(completely counterclockwise)

www.chpower.com

14