Description Continued, Directions for Use, Notas

Operating Instructions and Parts Manual

PW1049

Description (Continued)
		NOTICE
impact to 60º wide fan by twisting the
	• Due to their increased cleaning
nozzle. Adjust pressure from high to
		power, Quick Click nozzles can cause
low by extending nozzle 1/2".
		damage to vehicles, woodwork,
Note: Nozzle must be at minimum		paint, loose cement and other soft
pressure to suction detergent.		materials. Use with caution.

alto impacto o con una boquilla turbo. Al hacer esto puede quebrar la ventana. La forma más segura de evitar dañar las superficies es seguir estos pasos:

1. Antes de apretar el gatillo, ajuste

la boquilla en un patrón en

limpieza. Luego sostenga la boquilla en un ángulo de 45 grados con respecto a la superficie de limpieza. Dispare la pistola.

3. Varíe el ángulo de rociado del

patrón en abanico y la distancia a

la superficie de limpieza hasta

Turbo (Rotary)

Nozzle

Excellent for deep- cleaning tough surfaces, such as stained concrete,

HOW TO AVOID DAMAGING SURFACES

Damage to cleaning surfaces occurs because the impact force of the water

abanico amplio.

2. Coloque la boquilla aproximada-

mente a 4-5 pies (1-1.5 m) de

distan-cia de la superficie de

lograr una óptima eficiencia de

limpieza sin dañar la superficie.

four-wheelers/off-road motorcycles, or siding. Combines the power of a narrow, high-impact stream with the efficiency of a 25º fan pattern.

TYPE F ADAPTER

Type F - Fits most Black

&Decker, Powerwasher and Husky brand electric units.

TYPE K ADAPTER

Type K - Fits most

Karcher brand units.

Directions for

Use

1.Engage spray gun trigger safety latch in the safe position.

2.Disconnect existing lance/nozzle from gun.

3.If an adapter is necessary, push it into the end of the gun, then twist to lock the bayonet tabs into place. Make sure it is securely in place before spraying.

4.Connect Quick Click lance to gun.

5.Connect (push) desired Quick Click nozzle into end of Quick Click lance.

6.Complete cleaning project.

7.To disconnect nozzle, pull sliding collar on lance away from nozzle.

exceeds the durability of the surface. You can vary the impact force by controlling the nozzle’s fan pattern, the nozzle’s angle to the cleaning surface, and the nozzle’s distance from the cleaning surface. Never use a narrow high impact stream or a Turbo/rotary nozzle on a surface that is susceptible to damage. Avoid spraying windows with a narrow high impact stream or turbo nozzle. Doing so may break the window. The most sure way to avoid damaging surfaces is to follow these steps:

1.Before triggering the gun, adjust the nozzle to a wide fan pattern.

2.Place the nozzle approximately 4-5 feet away from the cleaning surface. Then hold the nozzle at a 45 degree angle to the cleaning surface. Trigger the gun.

3.Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning efficiency is achieved without damaging the surface.

Campbell Hausfeld PW1049 Description Continued, Directions for Use, Notas, Turbo Rotary Nozzle

Models: PW1049